Difference between revisions of "Replacing the Power Supply"
m (Improvements to image layout.) |
(Mostly completed document ready for review.) |
||
Line 1: | Line 1: | ||
== Disclaimer == | == Disclaimer == | ||
− | Performing this modification is done '''entirely at your own risk'''. If you are not familiar with disassembling your server and modifying electronic components then please do not perform this modification. This modification will absolutely void the warranty from HP on your MediaSmart Server. | + | Performing this modification is done '''entirely at your own risk'''. If you are not familiar with disassembling your server and modifying electronic components then please do not perform this modification. |
+ | |||
+ | '''BE CAREFUL INSIDE THE POWER SUPPLY''', especially if it’s been used. The capacitors hold a charge for some time. | ||
+ | |||
+ | This modification will absolutely void the warranty from HP on your MediaSmart Server. | ||
== Alternatives to performing this modification == | == Alternatives to performing this modification == | ||
− | HP provides an Out of Warranty Service option<ref>http://www.mediasmartserver.net/2009/08/18/hp-now-offering-extended-warranty-and-out-of-warranty-service/</ref> available for factory repair or replacement of servers that are outside the 1 year warranty period. | + | HP provides an Out of Warranty (OOW) Service option<ref>http://www.mediasmartserver.net/2009/08/18/hp-now-offering-extended-warranty-and-out-of-warranty-service/</ref> available for factory repair or replacement of servers that are outside the 1 year warranty period. If you are not comfortable with the above disclaimer, it is recommended you use the HP OOW service for the replacement of a failed power supply. |
== Why a modification is necessary == | == Why a modification is necessary == | ||
− | The MediaSmart Server power supply is a 200 watt HiPro HP-U200EF3, and uses a non-standard pinout for connection to the motherboard | + | The MediaSmart Server power supply is a 200 watt HiPro HP-U200EF3, and uses a non-standard pinout for connection to the motherboard. This requires a rewire of the power supply connector. |
[[File:HiProLabel.jpg|thumb|left]] | [[File:HiProLabel.jpg|thumb|left]] | ||
Line 17: | Line 21: | ||
== Compatible Replacement Power Supply models == | == Compatible Replacement Power Supply models == | ||
− | The following Power Supplies have been found to work successfully with the MediaSmart Server. | + | The following Power Supplies have been found to work successfully with the MediaSmart Server. Many of these power supplies appear to adhere to the SFX standard, which is the same as the ATX standard except that the -5 VDC is removed from pin 18<ref>http://pinouts.ru/pin_Power.shtml</ref>. |
+ | |||
* Shuttle PC40 - 250 watt, one rail each for 12v, 5v, and 3.3v. Same physical dimensions as MSS power supply. | * Shuttle PC40 - 250 watt, one rail each for 12v, 5v, and 3.3v. Same physical dimensions as MSS power supply. | ||
* Shuttle PC50 - Same as PC40 but 300 watt. | * Shuttle PC50 - Same as PC40 but 300 watt. | ||
Line 25: | Line 30: | ||
== Pin Configuration Reference == | == Pin Configuration Reference == | ||
− | The number convention for the 20-pin connectors are the same for both the | + | The number convention for the 20-pin connectors are the same for both the SFX and MSS power supplies, and all pin numbers will be referenced according to the following sequence. |
[[File:connectors.jpg]] | [[File:connectors.jpg]] | ||
− | Note that while the MediaSmart Server power supply has a different pinout configuration than the standard | + | Note that while the MediaSmart Server power supply has a different pinout configuration than the standard SFX pinout, the color coding of the wires are the same. |
{| cellspacing="10" | {| cellspacing="10" | ||
! Pin | ! Pin | ||
− | ! | + | ! SFX Color |
− | ! | + | ! SFX Description |
! MSS Color | ! MSS Color | ||
! MSS Description | ! MSS Description | ||
Line 79: | Line 84: | ||
|} | |} | ||
+ | The end result is that 4 additional wires are needed, 2 black and 2 yellow, in order to match the pinout configuration of the MediaSmart Server. | ||
− | == | + | |
− | The female pins must be removed from the plastic housing of the connector on the new power supply so that they can be rewired to match the pinout specification required by the MediaSmart Server. A special Molex tool exists for this purpose | + | == Disassembly == |
+ | In the absence of a MediaSmartServer.net tutorial on this, please refer to [http://www.myhomeserver.com/?page_id=10 this tutorial for instructions] on how to take apart your MediaSmart Server to gain access to the failed power supply. A video is also available [http://homeservershow.com/the-home-server-show-video-podcast-1-upgrading-the-ram-in-your-hp-media-smart-server.html]courtesy of the HomeServerShow.com. | ||
+ | |||
+ | |||
+ | == Rewiring the connector == | ||
+ | The female pins must be removed from the plastic housing of the connector on the new power supply so that they can be rewired to match the pinout specification required by the MediaSmart Server. A [[#Helpful tools and parts|special Molex tool exists for this purpose]]. There is also an alternative method courtesy of "Rachel" at TheBestCaseScenario.com<ref>http://www.thebestcasescenario.com/forum/showthread.php?t=410</ref>. This alternative method is shown in the following images. | ||
<gallery> | <gallery> | ||
Line 89: | Line 100: | ||
File:pinremoval4.jpg | File:pinremoval4.jpg | ||
</gallery> | </gallery> | ||
+ | |||
+ | The additional 2 black and 2 yellow wires that are required to meet the MediaSmart Server pinout configuration can be obtained from the P4 power connector of the new power supply. | ||
+ | [[File:P4wires.jpg|thumb|left]] | ||
+ | <br style="clear: both" /> | ||
+ | |||
+ | Alternatively, you could cut wires from the extraneous power plugs on the new power supply to the right length and add pins to the wires for fitment into the new power supply connector. Please see the [[#Helpful tools and parts|Helpful tools section]] for more details on the tools needed to perform this. | ||
+ | |||
+ | Depending on the new power supply you are using, it may be necessary to cut some length from the wires in which case you will need to use new pins on all the wires. It is recommended to practice the fitment of your new power supply inside the server chassis. | ||
+ | |||
+ | Any extra wires will need to either be de-soldered from the new power supply, or cut and capped with shrinkwrap. | ||
+ | |||
+ | |||
+ | == Testing the completed power supply == | ||
+ | Once the rewiring is complete, you should check the connectors to ensure the color coding is correct for the MediaSmart Server. | ||
+ | [[File:rewirecomplete.jpg|thumb|left]] | ||
+ | <br style="clear: both" /> | ||
+ | |||
+ | The power supply can be tested. Use a paper clip to short pins 1 and 2 to see if the unit powers up. If it does, you can test each pin to ensure correct voltage. | ||
+ | |||
+ | <gallery> | ||
+ | File:bridgepin1pin2.jpg | ||
+ | File:testvoltage.jpg | ||
+ | </gallery> | ||
+ | |||
+ | |||
+ | == Installation and reassembly == | ||
+ | The new power supply can now be attached to the motherboard tray and inserted into the MediaSmart Server. Depending on which replacement power supply you used and how you modified it, you may have to fit extra lengths of wire. In this example using the Sparkle power supply, it is shorter in length and allowed enough room to store the extra lengths of wire. Some other models may require cutting and putting new pins on the wires. | ||
+ | |||
+ | <gallery> | ||
+ | File:install1.jpg | ||
+ | File:install2.jpg | ||
+ | File:install3.jpg | ||
+ | File:install4.jpg | ||
+ | </gallery> | ||
+ | |||
+ | To reassemble your MediaSmart Server after installing the new power supply, please reverse the directions found in the [[#Disassembly|Disassembly section of this guide]]. | ||
+ | |||
+ | |||
+ | == Helpful tools and parts == | ||
+ | The following tools may prove to be helpful while modifying the Connector on the new power supply to work with the MediaSmart Server. The links here are given only as examples and do not endorse any particular vendor or source. | ||
+ | * 1 x Deluxe Molex Hand Crimp Tool (CRIMPER-DX) = $24.95<ref>http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=1277</ref> | ||
+ | * 2 x Minifit Pins Female - Silver - 4 Pack (MINIFIT-F) = $0.98 <ref>http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=3592</ref> | ||
+ | * 2 x Connectx™ ATX 20 pin Female Pins, GOLD-plated - 20 Pack (ACR-CB8133) = $7.98 <ref>http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=1418</ref> | ||
+ | * 1 x Molex Mini-Fit Connector Pin Extractor (MINIFITOOL) = $24.99 <ref>http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=894</ref> | ||
+ | * Multimeter for testing voltage at each pin | ||
Revision as of 13:52, 19 August 2009
Contents
- 1 Disclaimer
- 2 Alternatives to performing this modification
- 3 Why a modification is necessary
- 4 Compatible Replacement Power Supply models
- 5 Pin Configuration Reference
- 6 Disassembly
- 7 Rewiring the connector
- 8 Testing the completed power supply
- 9 Installation and reassembly
- 10 Helpful tools and parts
- 11 Credits
- 12 References
Disclaimer
Performing this modification is done entirely at your own risk. If you are not familiar with disassembling your server and modifying electronic components then please do not perform this modification.
BE CAREFUL INSIDE THE POWER SUPPLY, especially if it’s been used. The capacitors hold a charge for some time.
This modification will absolutely void the warranty from HP on your MediaSmart Server.
Alternatives to performing this modification
HP provides an Out of Warranty (OOW) Service option[1] available for factory repair or replacement of servers that are outside the 1 year warranty period. If you are not comfortable with the above disclaimer, it is recommended you use the HP OOW service for the replacement of a failed power supply.
Why a modification is necessary
The MediaSmart Server power supply is a 200 watt HiPro HP-U200EF3, and uses a non-standard pinout for connection to the motherboard. This requires a rewire of the power supply connector.
Compatible Replacement Power Supply models
The following Power Supplies have been found to work successfully with the MediaSmart Server. Many of these power supplies appear to adhere to the SFX standard, which is the same as the ATX standard except that the -5 VDC is removed from pin 18[2].
- Shuttle PC40 - 250 watt, one rail each for 12v, 5v, and 3.3v. Same physical dimensions as MSS power supply.
- Shuttle PC50 - Same as PC40 but 300 watt.
- Sparkle Power - FSP200-50PL (shown in this guide)
Pin Configuration Reference
The number convention for the 20-pin connectors are the same for both the SFX and MSS power supplies, and all pin numbers will be referenced according to the following sequence.
Note that while the MediaSmart Server power supply has a different pinout configuration than the standard SFX pinout, the color coding of the wires are the same.
Pin | SFX Color | SFX Description | MSS Color | MSS Description |
---|---|---|---|---|
1 | Orange | +3.3 VDC | Black | Ground |
2 | Orange | +3.3 VDC | Green | +5 VDC (always on) |
3 | Black | Ground | Red | +5 VDC |
4 | Red | +5 VDC | Red | +5 VDC |
5 | Black | Ground | Black | Ground |
6 | Red | +5 VDC | Purple | +5 VDC (Standby) |
7 | Black | Ground | Black | Ground |
8 | Gray | Power OK | Gray | Power OK |
9 | Purple | +5 VDC (Standby) | Black | Ground |
10 | Yellow | +12 VDC | Orange | +3.3 VDC |
11 | Orange | +3.3 VDC | Yellow | +12 VDC |
12 | Blue | -12 VDC | Black | Ground |
13 | Black | Ground | Red | +5 VDC |
14 | Green | Power On | Black | Ground |
15 | Black | Ground | Black | Ground |
16 | Black | Ground | Yellow | +12 VDC |
17 | Black | Ground | Yellow | +12 VDC |
18 | Reserved | Black | Ground | |
19 | Red | +5 VDC | Black | Ground |
20 | Red | +5 VDC | Orange | +3.3 VDC |
The end result is that 4 additional wires are needed, 2 black and 2 yellow, in order to match the pinout configuration of the MediaSmart Server.
Disassembly
In the absence of a MediaSmartServer.net tutorial on this, please refer to this tutorial for instructions on how to take apart your MediaSmart Server to gain access to the failed power supply. A video is also available [1]courtesy of the HomeServerShow.com.
Rewiring the connector
The female pins must be removed from the plastic housing of the connector on the new power supply so that they can be rewired to match the pinout specification required by the MediaSmart Server. A special Molex tool exists for this purpose. There is also an alternative method courtesy of "Rachel" at TheBestCaseScenario.com[3]. This alternative method is shown in the following images.
The additional 2 black and 2 yellow wires that are required to meet the MediaSmart Server pinout configuration can be obtained from the P4 power connector of the new power supply.
Alternatively, you could cut wires from the extraneous power plugs on the new power supply to the right length and add pins to the wires for fitment into the new power supply connector. Please see the Helpful tools section for more details on the tools needed to perform this.
Depending on the new power supply you are using, it may be necessary to cut some length from the wires in which case you will need to use new pins on all the wires. It is recommended to practice the fitment of your new power supply inside the server chassis.
Any extra wires will need to either be de-soldered from the new power supply, or cut and capped with shrinkwrap.
Testing the completed power supply
Once the rewiring is complete, you should check the connectors to ensure the color coding is correct for the MediaSmart Server.
The power supply can be tested. Use a paper clip to short pins 1 and 2 to see if the unit powers up. If it does, you can test each pin to ensure correct voltage.
Installation and reassembly
The new power supply can now be attached to the motherboard tray and inserted into the MediaSmart Server. Depending on which replacement power supply you used and how you modified it, you may have to fit extra lengths of wire. In this example using the Sparkle power supply, it is shorter in length and allowed enough room to store the extra lengths of wire. Some other models may require cutting and putting new pins on the wires.
To reassemble your MediaSmart Server after installing the new power supply, please reverse the directions found in the Disassembly section of this guide.
Helpful tools and parts
The following tools may prove to be helpful while modifying the Connector on the new power supply to work with the MediaSmart Server. The links here are given only as examples and do not endorse any particular vendor or source.
- 1 x Deluxe Molex Hand Crimp Tool (CRIMPER-DX) = $24.95[4]
- 2 x Minifit Pins Female - Silver - 4 Pack (MINIFIT-F) = $0.98 [5]
- 2 x Connectx™ ATX 20 pin Female Pins, GOLD-plated - 20 Pack (ACR-CB8133) = $7.98 [6]
- 1 x Molex Mini-Fit Connector Pin Extractor (MINIFITOOL) = $24.99 [7]
- Multimeter for testing voltage at each pin
Credits
Forum member "erail" performed the first known power supply replacement[8] and documented his process for this guide.
Forum member "pettt" followed erail's tutorial and documented the steps he took with pictures, and provided the home-made Connector re-wire process.
References
- ↑ http://www.mediasmartserver.net/2009/08/18/hp-now-offering-extended-warranty-and-out-of-warranty-service/
- ↑ http://pinouts.ru/pin_Power.shtml
- ↑ http://www.thebestcasescenario.com/forum/showthread.php?t=410
- ↑ http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=1277
- ↑ http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=3592
- ↑ http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=1418
- ↑ http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=894
- ↑ http://www.mediasmartserver.net/forums/viewtopic.php?t=1102&postdays=0&postorder=asc&start=225