It is currently Wed Oct 17, 2018 12:31 pm

All times are UTC - 7 hours [ DST ]

Recent News:



Post new topic Reply to topic  [ 21 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Tue May 29, 2018 10:25 am 
Offline
1TB storage
1TB storage

Joined: Sun Feb 18, 2018 12:39 pm
Posts: 30
Thanks: 0
Thanked: 0 time in 0 post
I tried my wired USB keyboard, and it still didn't work. I'm going to look a little closer at the cable I'm using. Would you happen to know the exact pinout that is needed in order to get the Hit Del to enter bios message to appear for the ex490? The front usb port isn't responding to anything until the OS boots up. The only usb port that does respond at initial startup is the lowermost rear port.


Top
 Profile  
Thanks  

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
PostPosted: Sat Jun 02, 2018 4:28 pm 
Offline
1TB storage
1TB storage

Joined: Sun Feb 18, 2018 12:39 pm
Posts: 30
Thanks: 0
Thanked: 0 time in 0 post
After some research, it looked like homegroup was the culprit for my error code 8032. I figured the two choices I had were to either disable it on every machine, or create a homegroup on the server, and join every machine to it. I chose the second one, and I haven't had the error come back since. If it does, I'll keep you posted.


Top
 Profile  
Thanks  
PostPosted: Fri Jun 08, 2018 11:38 am 
Offline
Max Contributor
Max Contributor

Joined: Tue Jan 05, 2010 9:29 am
Posts: 1200
Thanks: 5
Thanked: 153 times in 151 posts
Ahh.
I have never enabled homegroup on any of my clients.
Just workgroups which is required.

_________________
EX-490
WHS v1
VGA/PS2 Keyboard/PS2 Mouse/Serial debug board
Q9450s CPU
Stock Ram
ESATA Sansdigital Towerraid TR5M-B
Popcorn C-200
Popcorn A-200
Dune HD Connect
Rasberry PI OSMC(KODI)
ReadyNAs RN316


Top
 Profile  
Thanks  
PostPosted: Fri Jun 08, 2018 1:43 pm 
Offline
1TB storage
1TB storage

Joined: Sun Feb 18, 2018 12:39 pm
Posts: 30
Thanks: 0
Thanked: 0 time in 0 post
I might still be having trouble with this. It seems like either if my office PC logs into the connector, all other connectors get locked out OR of too many clients around the house are connected, the next connection attempt will fail. I reset the machine, and I no longer use homegroup. I'll keep poking around at it I guess. Its working today, and I'm going to leave my office machine disconnected for a while to see if it acts up again.


Top
 Profile  
Thanks  
PostPosted: Thu Jun 14, 2018 8:37 am 
Offline
1TB storage
1TB storage

Joined: Sun Feb 18, 2018 12:39 pm
Posts: 30
Thanks: 0
Thanked: 0 time in 0 post
Leaving a note to myself here. See this topic: viewtopic.php?t=11189

I set mine to send NTLMV2 response only because that version is a little more secure, and I only have Win 7 machines. Afterwards, I was able to immediately connect to the dashboard.


Top
 Profile  
Thanks  
PostPosted: Wed Jun 27, 2018 11:32 am 
Offline
1TB storage
1TB storage

Joined: Sun Feb 18, 2018 12:39 pm
Posts: 30
Thanks: 0
Thanked: 0 time in 0 post
Alright, so its been a couple of weeks with relatively few issues. Over the course of this thread I have reinstalled Windows twice. Without further tinkering to absolutely confirm the problem, my suspicion is that when I disable SMBV1 on WHS 2011, it severely degrades the performance of the connector software to a point where clients will only stay connected to the server for a maximum of about two days. To make things worse, re-enabling SMB V1 doesn't get rid of the problem, and client connectors still act up frequently. Workarounds for the problem that I have discovered so far are to either

A. Be ready to reset your server about every two days,

B. Navigate to your shared folders and login to the shared drive via file explorer

C. Leave SMB V1 enabled.

I chose to leave it enabled, and my clients have worked reliably ever since.


Top
 Profile  
Thanks  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page Previous  1, 2

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group