screenshots

Those don't show any error messages during your install process, I have no idea what problem you are trying to show us.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

My other screenshots will not post.

I dont get any errors, just will not boot from usb or disk.

Again, error messages or descriptions of failure are required if you want us to help you.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

What boot device are you selecting in the F12 menu? It needs to be USB-CDRom for your flash key that is connected to the bottom rear port.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

I did that, usb-cdrom, F12, rear bottom rear usb.

At one time it did boot from my Vail CD. But now its not.

I keep asking for more details, and you keep just saying it doesn't work. I'm sorry but I don't know how to help you.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

In the Advanced BIOS Features you can select the first boot device I would start there. Mines set to FLOPPY but I see no reason why USB-CDROM would not work. Just make certain the disc you are using is bootable.

Good Luck....

_________________
Exploring the possibilities!

Migrated from WHS2011 to WS2012E: HIGHLANDER

~ Norco 4220 Enclosure
~ Gigabyte GA-990FXA-UD5
~ AMD Phenom II X4 995 3.2 GHz
~ 8 GB Corsair Vengeance DDR3 1600 (PC3 12800)
~ 3 Supermicro AOC-SASLP-MV8

The bios (on the EX47x) lets you set these options but ignores them.

Better to press F12 on boot and select the device you want to boot from.

If I'm remembering correctly my days from HP, the boot options in the BIOS are irrelevant, they are hard coded and the only way to override them is via F12.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

Is there a way to connect a sata dvd drive to the EX470?

You would need to run a SATA cable from one of the internal ports on the backplane out to your SATA DVD drive, and then you'd need another power supply to power it.

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins? If so, be sure to Rate them at WeGotServed.

To install vail do you have to delete the sys portion on the hard drive?