Help, I used RDC (remote desktop connection) to go into whs and turn off remote access!
Of course, not realizing what I had done I now cannot get back into whs to turn it back on! The console cannot connect and I can’t use RDC due to the fact that I stupidly unchecked the box for remote access.
Is there anything I can do other than server recovery to remedy the situation.
I want to turn off the server at risk message for remote access. I don’t use nor want remote access. In trying registry stuff and other things I thought the check box in system properties might be helpful.

Well, if you purchase the video connector and install it, then you won't need remote access on. Otherwise, a recovery (NOT RESET) with all drives in place would be the only way to get it back.
If you are having drive problems, then I would pay the money and get the video cable.
Goodluck

P.S. Your not the first, some people have messed with the nic settings and lost contact with the server and had to do a recovery. That is why they recommend Not to remote into the headless server and only use the console. But we like to do other stuff, just have to be careful....

_________________
[X510 CPU/RAM/All 2 TB Red's] [X510 CPU/Sync'ed Backup/All 2 TB Hitachi's]
[X510 /2 in box]
[X710 LIAN LI DIY W2016E] Stablebit Drivepool [EX-503 LIAN LI 5-bay USB3 External]
Fear the Cloud