It is currently Fri Oct 20, 2017 5:17 pm

All times are UTC - 7 hours [ DST ]

Recent News:



Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Tue Mar 29, 2016 2:51 pm 
Offline
1.5TB storage
1.5TB storage

Joined: Wed Feb 12, 2014 2:49 pm
Posts: 64
Thanks: 2
Thanked: 0 time in 0 post
Hi folks. It's taken me a couple of days to finally get this right on my server. Had loads of problems and whole process is very fussy. It was further complicated by lots of conflicting guides on the web suggesting lots of different methods. Well, this is the one that worked for me! Thought I'd share in case anyone else is needing to do this.

WHS 2011 Install
Done on a HP MEdiasmart Ex495 (upgraded CPU + 4GB ram) via a USB install. This one not unattended or blind (headless). Done using a display board so you can see it installing.

1. System Hard Disk prep:
Take what will be your System Hard Drive. Wipe it via Windows Disk manager:

Image

Don’t do anything else to it - no formatting or cleaning etc.

2. USB Stick Prep:
Plug it into a PC
Open Command Prompt as Administrator
Use following commands:

Type “diskpart” then:

list disk (This will list all connected drives – look for your USB drive, and note down its number – you really don’t want to get this wrong!)
select disk [your disk number]
clean
create part pri
select part 1
format fs=ntfs
active
Exit

NB. the full rather than quick format appears to work better.

3. Burn ISO to USB
Burn the WHS2011 Instal iso to USB using this tool:
https://wudt.codeplex.com/

4. Boot and install
With power off: Connect the Hard Drive in the bottom bay of your server. Put the usb drive in a port, but not the bottom one on the rear.

Power on + press Del repeatedly to bring up bios menu.

In Boot>Boot Device Priority - Ensure 1st device is your hard drive. Also make sure your usb key not showing.
In Boot>Hard Disk Drives - Ensure your Hard disk is “1st Drive” and us “2nd drive”

Save Changes and exit.

When reboots, press F11 repeatedly to choose the boot device. Then choose your USB device. This will commence the install.

5. Setting the Homegroup

Half way through the install, when you get to here:

Image

Press Shift + F10. This will bring up command prompt. Enter:

Control system

The Change Settings in the bottom right

Computer Name>Change

Then set the Workgroup name only. Make sure it matches the homegroup name of the other machines on your network.

Navigate back to where you were. Don not restart now - choose later.

That’s it!


Top
 Profile  
Thanks  

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group