It is currently Sun Sep 15, 2019 12:01 pm

All times are UTC - 7 hours [ DST ]

Recent News:



Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Wed Jul 31, 2019 4:21 am 
Offline
.5TB storage
.5TB storage

Joined: Fri Jan 04, 2008 4:04 am
Posts: 18
Thanks: 0
Thanked: 0 time in 0 post
Hi all

I have three WD Red 8TB drives in my X510 running WHS2011 but would like to use the system bay with a larger disc than the 2TB maximum.

With the range of high capacity USB sticks available these days I was just wondering if I could install WHS2011 on a USB stick and boot off the lowest of the rear USB ports.


Top
 Profile  
Thanks  

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
PostPosted: Wed Jul 31, 2019 10:02 am 
Offline
Max Contributor
Max Contributor

Joined: Tue Jan 05, 2010 9:29 am
Posts: 1303
Thanks: 5
Thanked: 170 times in 168 posts
It might work I have never tried it.
whs2011(Vail) requires a minimum 160 GB drive .
But then you only gain the os drive bay possibly.
But don't forget that there probably is some data on that os drive in the d partition.

Why not go with a 4 or 5 bay drive enclosure that can use either usb or esata.
I saw a 4 bay on amazon for like $90.00 the other day.

_________________
EX-490
WHS v1
VGA/PS2 Keyboard/PS2 Mouse/Serial debug board
Q9450s CPU
Stock Ram
ESATA Sansdigital Towerraid TR5M-B
Popcorn C-200
Popcorn A-200
Dune HD Connect
Rasberry PI OSMC(KODI)
ReadyNAS RN316
Amazon FireStick
Amazon ECHO
AnyDvD
MyMovies


Top
 Profile  
Thanks  
PostPosted: Wed Jul 31, 2019 1:02 pm 
Offline
.5TB storage
.5TB storage

Joined: Fri Jan 04, 2008 4:04 am
Posts: 18
Thanks: 0
Thanked: 0 time in 0 post
HI

I think I will just try it.

My curent set up has a 120GB SSD as the system drive and 60GB is used by WHS2011.

So I could use a 128GB USB stick.

I have a VGA, keyboard and mouse adaptor but not sure if I can get into the BIOS and change the boot order and permanently save the changed boot order. But then if the system disc bay hasn't got a bootable disc in then my thoughts are it should boot from the USB port. That is what happens when setting up WHS2011 from a USB stick.

I may hust do a partition copy from my current SSD to a USB stick using Paragon and see what happens.


Top
 Profile  
Thanks  
PostPosted: Thu Aug 08, 2019 10:03 pm 
Offline
2.0TB storage
2.0TB storage

Joined: Sun May 19, 2013 9:40 pm
Posts: 195
Thanks: 33
Thanked: 11 times in 11 posts
nige wrote:
My curent set up has a 120GB SSD as the system drive and 60GB is used by WHS2011.

So I could use a 128GB USB stick.

I have a VGA, keyboard and mouse adaptor but not sure if I can get into the BIOS and change the boot order and permanently save the changed boot order. But then if the system disc bay hasn't got a bootable disc in then my thoughts are it should boot from the USB port. That is what happens when setting up WHS2011 from a USB stick.

I may just do a partition copy from my current SSD to a USB stick using Paragon and see what happens.

Make sure the mobo jumper is set correctly and you can get into BIOS by pressing DEL. If memory serves the boot settings are not fixed, can be changed & saved.

I also hear you saying that you've got it working OK fine with a smaller drive, but it couldn't hurt to use a stick bigger than 128gb for the test just to be safe. MS recommends the physical OS drive should be at least 160gb. You don't want to piss off Mr. Gates... [-X

Let us know how it goes!

_________________
EX-495 w/ WHS v1
VGA / PS2 Keyboard_Mouse debug board
Q8200s CPU w/ two 30mm cooling fans
4gb G.Skill CL5 Ram
7200 RPM WD Gold
Rear Case Cover Mod

Plus a Few Spare EX490's to Tinker With


Top
 Profile  
Thanks  
PostPosted: Mon Aug 12, 2019 4:55 am 
Offline
.5TB storage
.5TB storage

Joined: Fri Jan 04, 2008 4:04 am
Posts: 18
Thanks: 0
Thanked: 0 time in 0 post
lioninstreet wrote:
nige wrote:

\:D/
Make sure the mobo jumper is set correctly


Thanks for the info.

Which jumper and what are the settings ?

I can see JP1 and JP2 on my mobo.

JP1 has a jumper on it, JP2 is bare.

It would be great if I can get this done as I need to replace the mobo anyway as the network connection stopped working. I have a spare board.


Top
 Profile  
Thanks  
PostPosted: Mon Aug 12, 2019 10:19 am 
Offline
2.0TB storage
2.0TB storage

Joined: Sun May 19, 2013 9:40 pm
Posts: 195
Thanks: 33
Thanked: 11 times in 11 posts
Here is a link to a thread by Yakuza showing the process of setting up the jumper. It's the same on a ex49x series. Note that you may need to review Jkasal's post near the bottom of this thread (on September 24, 2009 at 8:25 pm) if you have any problems.

http://www.mediasmartserver.net/2009/01 ... x487-bios/

_________________
EX-495 w/ WHS v1
VGA / PS2 Keyboard_Mouse debug board
Q8200s CPU w/ two 30mm cooling fans
4gb G.Skill CL5 Ram
7200 RPM WD Gold
Rear Case Cover Mod

Plus a Few Spare EX490's to Tinker With


Top
 Profile  
Thanks  
PostPosted: Mon Aug 19, 2019 9:14 am 
Offline
.5TB storage
.5TB storage

Joined: Fri Jan 04, 2008 4:04 am
Posts: 18
Thanks: 0
Thanked: 0 time in 0 post
Got into the boot screen easily and set up USB as first boot device with an external HD case in the rear lower USB port. The case had WHS 2011 installed on it and had been the C drive when created. But it was now the D drive and the empty HD I put in the bottom HD bay was the C drive.

So my plan now is to try to install WHS 2011 on an Integral 128GB USB stick, one of the tiny metal cased ones.

What I will try is to install the WHS setup files onto a bootable hard drive.

Install WHS2011 to the USB stick and when done go into BIOS so it boots up to the USB stick. Hopefully I can then change the drive letter to C


Top
 Profile  
Thanks  
PostPosted: Mon Aug 19, 2019 11:56 am 
Offline
2.0TB storage
2.0TB storage

Joined: Sun May 19, 2013 9:40 pm
Posts: 195
Thanks: 33
Thanked: 11 times in 11 posts
Once you get the OS booting from the USB stick, it would be interesting to see if the MSS will permit it to boot using a different USB port other than the lower rear port.

That just in case the lower rear port needs to be used for something else like a PXE paperclip bypass with WHSv1 on a USB with a ex49x....

viewtopic.php?f=25&t=14522&p=105009&hilit=paperclip+no+more#p105009

_________________
EX-495 w/ WHS v1
VGA / PS2 Keyboard_Mouse debug board
Q8200s CPU w/ two 30mm cooling fans
4gb G.Skill CL5 Ram
7200 RPM WD Gold
Rear Case Cover Mod

Plus a Few Spare EX490's to Tinker With


Top
 Profile  
Thanks  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group