MediaSmartServer.net http://www.mediasmartserver.net/forums/ |
|
How to connect a Windows 10 PC to a MediaSmart Sever 495 http://www.mediasmartserver.net/forums/viewtopic.php?f=3&t=15240 |
Page 3 of 8 |
Author: | yooperdon [ Sat Oct 16, 2021 2:04 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Long list of updates. This time I noticed that the server did not reboot after the recovery was finished and I went to install the console on the PC. So I forced a reboot of the server. It has now completed the initialization process. This is the first time I was asked for server name and PW during the process. I now have all blue lights(including the drives). I will now connect the server back to the net work to receive the updates and see what happens next. I hope I am closer to being back on line. Stay tuned |
Author: | yooperdon [ Sat Oct 16, 2021 2:22 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
New update: I have the server connected to the network. All updates have been installed, I have added one account with full access, and the server shows that the laptop is set up in "computers and backup" tab. I feel like I have gone full circle. Now I need to load the connectivity SW on the Windows 10 machines so they can be backed up. I will ask for your instructions on this, as I seem to making this more difficult than it should be. And..................... All lights remain blue! Thanks |
Author: | Ruben Rocha [ Sun Oct 17, 2021 9:36 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Well now that it has updated. Just set the disc's aside, From the win10 pc Use your browser and type hpserver:55000 If that is still the server name or open file manager and then open the software folder then open Home Server Connector Software run setup Note In both cases you probably want to disable Norton till installed |
Author: | yooperdon [ Sun Oct 17, 2021 1:40 pm ] | ||
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 | ||
Here is the error message running the setup as an admin from the server. Happy Sunday!
|
Author: | Ruben Rocha [ Sun Oct 17, 2021 2:29 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
All I can think of are two possible items other than something is blocking your access. Try a different browser. Go back to the xp machine and enable the guest account |
Author: | yooperdon [ Tue Oct 19, 2021 11:04 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
I have created the Guest account from the XP machine and tried MS Edge in place of Google Chrome to access the Server using http:\\HPSERVER:55000 with no success(same error message as before). Just for fun I also tried to access the server from the XP machine via the URL and was not successful. Which surprised me. I guess that means that this access is not being allowed from the server. Nothing to do with the PC as the XP machine is already connected with the server. I'll try power cycling the server to see if anything changes. I am also running out of ideas. Is there any kind of diagnostics that I can run either on or with the server to confirm that it is healthy? Thanks |
Author: | yooperdon [ Tue Oct 19, 2021 11:23 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
I just looked into the Tool kit 1.1 files and noticed that it shows "Checking if Remote Desktop proxy port is allowed by Windows Firewall......" This is under Home Server Connectivity heading. FAIL: Remote Desktop proxy port is not allowed" Can this cause the issue I am seeing? I do not have remote access enabled at this point as I have never seen a need for it. Thanks, |
Author: | yooperdon [ Tue Oct 19, 2021 2:06 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Next update: I was able to remove/correct the "Checking if Remote Desktop proxy port is allowed by Windows Firewall...... FAIL: Remote Desktop proxy port is not allowed" message by enabling remote access. However, I still can not connect to the server using the 55000 URL. I keep looking for an issue Thanks |
Author: | Ruben Rocha [ Wed Oct 20, 2021 8:58 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Not sure if this will help but try a remote desktop connection. This opens a window on your pc that shows the server as if it had a display connected. Goto file explorer on the pc right click on hpserver. Select Connect with Remote desktop connection Login is administrator Password Whatever your main password is you set. You may get a not secure message but just ignore and allow |
Author: | yooperdon [ Wed Oct 20, 2021 10:03 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Ruben, I was able to connect remotely to the server from the windows10 machine. I was ale to open the software folder, but when I tried to execute the app(any of them) i received the same error message about access rights. To contact the administrator. This is same same message that I get when I use Explorer directly. Is there a security access setting that I am missing? Either the server or the PC? I would like to understand why the 55000 URL does not work. I did reboot the server, it did not make any difference. I was very glad to see that the server did reboot without any errors! That is progress. Thanks |
Author: | Banquo73 [ Wed Oct 20, 2021 11:13 am ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
The fact that the URL doesn't work on either your XP or Win10 computers suggests to me an issue with your router configuration. Does your server have a static IP address? Have you checked you're forwarding the necessary ports for that IP address, namely TCP Ports 80, 443 and 4125? |
Author: | yooperdon [ Wed Oct 20, 2021 3:05 pm ] | ||
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 | ||
I learning more about the WHS than I ever intended, but here is where I am now. I have confirmed a static IP with the server. I also established the port forwarding for the server IP on the router. I have a Orbi RBR50 at the house. I hopefully followed the instructions to setup the ports as you suggested. The router accepted the "Adds" that I entered. Here is my screen shot of what the "server?" is sending, or is this coming from the router? Thanks
|
Author: | Banquo73 [ Wed Oct 20, 2021 3:47 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
Have you retried the HPSERVER:55000 URL in a web browser now you've added those ports to your router? I think the permissions problem on accessing files on the network share (as in your screenshot) is a separate issue, just thought I'd see if I could help solve the URL problem first. |
Author: | yooperdon [ Wed Oct 20, 2021 5:45 pm ] |
Post subject: | Re: How to connect a Windows 10 PC to a MediaSmart Sever 495 |
I did manage to add the tool kit to the server and ran the connectivity test. It passed all tests. So the server is happy with the network connectivity. I will keep trying additional changes to try and determine what is blocking access. Thanks |
Page 3 of 8 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |