Trying to get two servers working off 1 internet connection is very tricky but I have done it in the past but never to my full satisfaction. Now for me the issue came in with port 443. I had to experiment with this abit forwarding 443 to one server and 444 to another for HTTPS. I then controlled everything from my primary servers landing page and I used the Whiist Add-In to create the links for the 2nd server. The issue I encountered was the landing pages LOGIN Button would always goto the 2nd server because for that one to work I had to let it have 443 and my primary server had to have 444 so I had to create a REMOTE LOGON link for my primary server. I never could get my primary to be 443 and my second server to be 444.

I use a Linksys WRT610N Router and its always been reliable for me so I got this great idea to change out the router to a DLink DIR655 and other fine router. Thing is with the DIR655 I could not get the same results as my Linksys so I gave the DIR655 a task offsite where its working well. It could be the fact that I am more accustome to Linksys Routers but I was able to get two servers to run remote access using one internet connection but not to my full satisfaction and yes I tried many other thing like External to Internal Port Forwarding but had only success in what I described above.

If you has only the Vail Server running on your internet connection I would tell you ignore the error message and see if the server could be seen outside your network.

On another note recently I was playing with LOGMEIN and I installed it on two of my offsite servers one is an EX470 the other is a DIY Build running Vail and through that software I am able to logon to both servers desktops much like and RDP session which helps me out until my company figures out what to do with their current ISP. Since the two servers can not configure that router at work at all because its locked out and not setup to be automatically configured the LOGMEIN software worked like a charm and I am liking it very much along with their Hamchi VPN Software which provides me a very nice path to each of those servers.

Good Luck with your task at hand. If you use the 444 and 443 port forwarding method you may have to alternate them betwwen the two servers to get them to work if your router is willing to co-operate.

Congrats in advance on getting married this Sat. Wish you much happiness. In this case the server is not all that important but keeping things wife friendly will.