It is currently Thu Feb 20, 2020 10:29 am

All times are UTC - 7 hours [ DST ]

Recent News:



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 
Author Message
PostPosted: Wed Jul 14, 2010 10:18 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Oct 17, 2009 7:10 pm
Posts: 5157
Location: Georgia, USA
Thanks: 86
Thanked: 703 times in 682 posts
Recently I purchased a CFI mini ITX enclosure that I thought was cool. Check it out => http://cgi.ebay.com/CFI-A9849-G45-Mini- ... 483b26fa93

It 3" longer, 1.5" Shorter and 2.5" wider then an MSS.

Here is the configuration I chose:
- Zotec GeForce 6100-ITX
- AMD BE2300 CPU - Had it so I used it
- Thermaltake Low Profile CPU Cooler - Need somethng better but this one fit.
Actually its a piece of junk - it will not latch down properly so I had to use a cable tie to hold the latch down
- P/N: CL-P0503 - While it works ok and fits it comming out
- 2 x 1TB Hitachi DeskStars
- 1 320GB WD Blue - System Drive
- Asus DVD Drive
- 4GB 2x2GB DDR2-6400 Crucial low profile - Board can accomodate 8 GB RAM
- 2 eSATA PCIe Card - the one that comes with the Sans Digital Port Multipliers

I installed VAIL to resume my testing as I had brought one of my EX470's into work for my convience and to show the non-believers what a WHS could do. I originally wanted to test VAIL out there but I really needed something to backup the clients at work that I knew would work for the long term.

I needed my test server to work on my projects so I built me this server just to test Vail with. I like the fact it had drive trays so I populated it with the Hitachi's which were on sale at Microcenter. CFI also has a 4 bay version and they are sold by the people on the eBay Link I provided earlier.

After its all assembled it looks like I packed 15 pounds of stuff in a 5 pound box but I did manage to run the cables in a neat and tidy mannor. Cable ties come in handy for that. I will take some pics between now and the week end of the internals.

_________________
Exploring the possibilities!

Migrated from WHS2011 to WS2012E: HIGHLANDER

~ Norco 4220 Enclosure
~ Gigabyte GA-990FXA-UD5
~ AMD Phenom II X4 995 3.2 GHz
~ 8 GB Corsair Vengeance DDR3 1600 (PC3 12800)
~ 3 Supermicro AOC-SASLP-MV8


Top
 Profile  
Thanks  
The following user would like to thank Comp1962 for this post
yakuza

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
PostPosted: Thu Jul 15, 2010 9:11 am 
Offline
Founder
Founder
User avatar

Joined: Tue Jul 31, 2007 11:54 am
Posts: 10704
Location: Fort Collins, Colorado
Thanks: 622
Thanked: 920 times in 875 posts
That's an interesting case, how's the noise level, and would it be suitable as an HTPC?

_________________
Alex Kuretz
Remote Notification: Monitoring and alerting for your Home Server via email, Twitter, text message, RSS, push notifications, and on your Mac desktop
Have you tried our Add-Ins?


Top
 Profile  
Thanks  
PostPosted: Thu Jul 15, 2010 5:54 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Oct 17, 2009 7:10 pm
Posts: 5157
Location: Georgia, USA
Thanks: 86
Thanked: 703 times in 682 posts
Its fairly quiet. Yes you can hear the fans but its not an annoying sound. If I compair it to the stock fans on the EX470 say running at 1800 RPM the noise level is about the same. Sitting accross the room you have to work hard to hear the fans. I listend to a Home Server Show Pod Cast and I am bout 3' from that Mini Server and I could not hear the fans over the pod cast and I was not blasting the pod cast at all so any fan noise present is easily canceled out. I know for some any fan noise is annoying.

Fans can easily be changed out. I will tell you the case does have good air flow through it I can feel air being pulled and pushed all around the case and for me thats more desirable.

The only thing I find about the case that I do not like is the front door being made of plastic. The rest of the case is perfect, very solid constuction. The cabinet covers are not finger print magnets hand have a very nice texture to them. The side covers are very smooth when removing and inserting they are very smooth yet firm when in place.

When fully populated the entire case weighs in about 15 pounds but picking it up its natural to want to grab it from the botton of the PSU and Front Door and the Front Door is where its weakest. The drive trays are simple and work well and the tray handles do a good job helping you seat the drives into the back plane.

All in all I am happy with the case. I just wish CFI paid more attention to the front door construction and not used plastic much the same as they did with the TR4M-B, that and its a major finger print magnet.

Here are some pictures I took of the assembled unit:

Attachment:
File comment: Size Comparison to an EX470
100_0640.JPG
100_0640.JPG [ 1.25 MiB | Viewed 6292 times ]

Attachment:
File comment: Front View
100_0642.JPG
100_0642.JPG [ 1.48 MiB | Viewed 6292 times ]

Attachment:
File comment: Back View
100_0650.JPG
100_0650.JPG [ 1.66 MiB | Viewed 6292 times ]

Attachment:
100_0643.JPG
100_0643.JPG [ 1.98 MiB | Viewed 6292 times ]

Attachment:
File comment: Drive Back Plane
100_0649.JPG
100_0649.JPG [ 1.11 MiB | Viewed 6292 times ]

Attachment:
File comment: Right Side View - Internals
100_0651.JPG
100_0651.JPG [ 1.75 MiB | Viewed 6292 times ]

Attachment:
File comment: Side View Left - Internals
100_0654.JPG
100_0654.JPG [ 1.75 MiB | Viewed 6292 times ]

Attachment:
File comment: PSU and Rear Fans
100_0655.JPG
100_0655.JPG [ 1.59 MiB | Viewed 6292 times ]

Attachment:
File comment: Back Plane - Connections
100_0652.JPG
100_0652.JPG [ 1.38 MiB | Viewed 6292 times ]


As you can see with everything installed its a tight fit making cable management abit difficult. Next time I am out I will be picking up some shorter SATA Cables to help neating things up but under the drives is plenty of room to tuck and hide the extra power connections not being used.

The only thing you really need to pay attention to is the availability of space for a good CPU Cooler. While I used Low Profile DIMMS you can use full size no problem but I chose low profile to provide some extra space for a wider CPU Cooler which could very well go over or come close the the DIMMS when I change out the CPU Coolor Assy Later.

Other then that for a low end build I am quite pleased with how the unit is performing. My next build will be a more powerful unit for an HTPC but first I need to upgrade my AV stuff in the living room.

_________________
Exploring the possibilities!

Migrated from WHS2011 to WS2012E: HIGHLANDER

~ Norco 4220 Enclosure
~ Gigabyte GA-990FXA-UD5
~ AMD Phenom II X4 995 3.2 GHz
~ 8 GB Corsair Vengeance DDR3 1600 (PC3 12800)
~ 3 Supermicro AOC-SASLP-MV8


Top
 Profile  
Thanks  
The following user would like to thank Comp1962 for this post
yakuza
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group