MediaSmartServer.net
http://www.mediasmartserver.net/forums/

Vail Install successful, no drive lights, blinking Health
http://www.mediasmartserver.net/forums/viewtopic.php?f=27&t=10524
Page 1 of 1

Author:  1strail [ Thu Mar 31, 2011 9:58 am ]
Post subject:  Vail Install successful, no drive lights, blinking Health

I've installed WHS 2011 on my EX 495. Everything looks good. Installed drives are the - stock 1.5TB Seagate which contains the OS (60gb) C: and D: (additional space on the seagate), and 1 additional 2tb hitachi drive E:.

Originally, WHS 2 configured the os partition as drive C:, the remaining space as drive E: and the drive containing the shares drive (data) D:. I renamed the E: to D:, D: to E:. I also moved share folders around and configured the dashbord to recognize the new locations. I am beginning to wonder if there was a service specific to HP's WHS 1 software that loads to tell the turn the HD lights on and turn off the blinking health light. Any ideas from anyone would be greatly appreciated. I've attached a snapshot of My Computer from the WHS 2011 Server.

Attachments:
Capture.JPG
Capture.JPG [ 91.65 KiB | Viewed 14201 times ]

Author:  yakuza [ Thu Mar 31, 2011 10:31 am ]
Post subject:  Re: Vail Install successful, no drive lights, blinking Healt

viewtopic.php?f=27&t=10365

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/