| MediaSmartServer.net http://www.mediasmartserver.net/forums/ |
|
| KUPUT MediaSvr ex495 to MicroServer Gen8/10 http://www.mediasmartserver.net/forums/viewtopic.php?f=25&t=15116 |
Page 1 of 1 |
| Author: | JiboJones [ Tue Sep 15, 2020 10:17 pm ] |
| Post subject: | KUPUT MediaSvr ex495 to MicroServer Gen8/10 |
Hi All, I had a power failure about two weeks ago, I've since not been able to access the server. All status light (pwr/net/health) are solid blue though I have no drive lights. I've powered off the server, restart. pwr/net lights up with health flashing for approx 3 minutes then goes solid blue, yet no drive lights. I suspect the backplane or PC onboard controller might be fried, though I have removed all drives and the health indicator flashes white - so not sure, could all my drive been blown? Anyway, is it possible to simply move the disks from one server to a new server, I was thinking to either a MicroServer Gen8 or Gen10 - will it boot up and will I be able to access all data? Jim |
|
| Author: | lioninstreet [ Tue Sep 15, 2020 11:37 pm ] |
| Post subject: | Re: KUPUT MediaSvr ex495 to MicroServer Gen8/10 |
No, but you can swap the drives into another ex49x. |
|
| Author: | Ruben Rocha [ Wed Sep 16, 2020 1:38 pm ] |
| Post subject: | Re: KUPUT MediaSvr ex495 to MicroServer Gen8/10 |
You kinda cross posted but read both post for help. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|