It is currently Thu Mar 28, 2024 2:09 am

All times are UTC - 7 hours [ DST ]

Recent News:



Post new topic Reply to topic  [ 121 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next
Author Message
PostPosted: Fri Aug 24, 2012 9:35 am 
Offline
.5TB storage
.5TB storage

Joined: Wed Apr 27, 2011 9:30 am
Posts: 13
Thanks: 2
Thanked: 0 time in 0 post
@merelin

The new source works. :) Here is the output:

./mediasmartserverd --activity
Found: HP MediaSmart Server 48X
/sys/devices/pci0000:00/0000:00:1f.2/host1
(?) scsi_host_index: 1
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sda, offset: 1, scsi_host_index: 0
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sda' (block)
/sys/devices/pci0000:00/0000:00:1f.2/host1
(?) scsi_host_index: 1
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sda, offset: 1, scsi_host_index: 0
/sys/devices/pci0000:00/0000:00:1f.2/host2
(?) scsi_host_index: 2
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdb, offset: 1, scsi_host_index: 1
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdb' (block)
/sys/devices/pci0000:00/0000:00:1f.2/host2
(?) scsi_host_index: 2
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdb, offset: 1, scsi_host_index: 1
/sys/devices/pci0000:00/0000:00:1f.2/host3
(?) scsi_host_index: 3
/sys/class/scsi_host/host3 <=> /sys/devices/pci0000:00/0000:00:1f.2/host3
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sdc, offset: 1, scsi_host_index: 2
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sdc' (block)
/sys/devices/pci0000:00/0000:00:1f.2/host3
(?) scsi_host_index: 3
/sys/class/scsi_host/host3 <=> /sys/devices/pci0000:00/0000:00:1f.2/host3
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sdc, offset: 1, scsi_host_index: 2
/sys/devices/pci0000:00/0000:00:1f.2/host4
(?) scsi_host_index: 4
/sys/class/scsi_host/host4 <=> /sys/devices/pci0000:00/0000:00:1f.2/host4
/sys/class/scsi_host/host3 <=> /sys/devices/pci0000:00/0000:00:1f.2/host3
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/block/sdd, offset: 1, scsi_host_index: 3
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/block/sdd' (block)
/sys/devices/pci0000:00/0000:00:1f.2/host4
(?) scsi_host_index: 4
/sys/class/scsi_host/host4 <=> /sys/devices/pci0000:00/0000:00:1f.2/host4
/sys/class/scsi_host/host3 <=> /sys/devices/pci0000:00/0000:00:1f.2/host3
/sys/class/scsi_host/host2 <=> /sys/devices/pci0000:00/0000:00:1f.2/host2
/sys/class/scsi_host/host1 <=> /sys/devices/pci0000:00/0000:00:1f.2/host1
/sys/class/scsi_host/host0 <=> /sys/devices/pci0000:00/0000:00:1f.2/host0
/sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/block/sdd, offset: 1, scsi_host_index: 3


Top
 Profile  
Thanks  

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
PostPosted: Fri Aug 24, 2012 10:36 am 
Offline
1TB storage
1TB storage

Joined: Wed Jan 19, 2011 2:19 am
Posts: 25
Thanks: 0
Thanked: 7 times in 5 posts
@mugenbb6

Good news! It works for me too hence everything seems to be working. I'll do packaging later on. Thank you for the testing!

Cheers!


Top
 Profile  
Thanks  
The following user would like to thank merelin for this post
mugenbb6
PostPosted: Thu Aug 30, 2012 5:27 am 
Offline
1TB storage
1TB storage

Joined: Wed Jan 19, 2011 2:19 am
Posts: 25
Thanks: 0
Thanked: 7 times in 5 posts
@mugenbb6

I've created a PPA https://launchpad.net/~merelin/+archive/mediasmartserverd.
Think lucid should be OK for you. Please install and give your feedback.

Cheers!


Top
 Profile  
Thanks  
PostPosted: Thu Dec 27, 2012 9:12 pm 
Offline
Newbie
Newbie

Joined: Thu Dec 27, 2012 9:01 pm
Posts: 2
Thanks: 0
Thanked: 2 times in 1 post
Took a little bit of fiddling with stuff, but I have the addresses for H341.

HDD 1 Red : 0x59
HDD 2 Red : 0x58
HDD 3 Red : 0x4E or 0x56
HDD 4 Red : 0x51

HDD 1 Blue : 0x4B or 0x53
HDD 2 Blue : 0x4C or 0x54
HDD 3 Blue : 0x52
HDD 4 Blue : 0x50

i Red : 0x18
i Blue : 0x0A
Power : 0x1B
USB : 0x12

I plugged them into led_acerh340.h and changed detection to accept DID/VID combo from H341 and all LEDs are working flawlessly on my H341:
Code:
/// mappings for LEDs
        enum {
                OUT_BLUE0               = 0x4b,
                OUT_BLUE1               = 0x4c,
                OUT_BLUE2               = 0x52,
                OUT_BLUE3               = 0x50,

                OUT_RED0                = 0x59,
                OUT_RED1                = 0x58,
                OUT_RED2                = 0x4e,
                OUT_RED3                = 0x51,

                //-
                OUT_USB_DEVICE  = 0x06, ///< bit 6

                OUT_USB_LED             = 0x12,
                OUT_POWER               = 0x1b,
                OUT_SYSTEM_RED       = 0x18,
                OUT_SYSTEM_BLUE      = 0x0A,
        };



Cheers


Top
 Profile  
Thanks  
PostPosted: Fri Dec 28, 2012 3:04 pm 
Offline
1TB storage
1TB storage

Joined: Wed Jan 19, 2011 2:19 am
Posts: 25
Thanks: 0
Thanked: 7 times in 5 posts
sparkvolt wrote:
Took a little bit of fiddling with stuff, but I have the addresses for H341.

HDD 1 Red : 0x59
HDD 2 Red : 0x58
HDD 3 Red : 0x4E or 0x56
HDD 4 Red : 0x51

HDD 1 Blue : 0x4B or 0x53
HDD 2 Blue : 0x4C or 0x54
HDD 3 Blue : 0x52
HDD 4 Blue : 0x50

i Red : 0x18
i Blue : 0x0A
Power : 0x1B
USB : 0x12

I plugged them into led_acerh340.h and changed detection to accept DID/VID combo from H341 and all LEDs are working flawlessly on my H341:
Code:
/// mappings for LEDs
        enum {
                OUT_BLUE0               = 0x4b,
                OUT_BLUE1               = 0x4c,
                OUT_BLUE2               = 0x52,
                OUT_BLUE3               = 0x50,

                OUT_RED0                = 0x59,
                OUT_RED1                = 0x58,
                OUT_RED2                = 0x4e,
                OUT_RED3                = 0x51,

                //-
                OUT_USB_DEVICE  = 0x06, ///< bit 6

                OUT_USB_LED             = 0x12,
                OUT_POWER               = 0x1b,
                OUT_SYSTEM_RED       = 0x18,
                OUT_SYSTEM_BLUE      = 0x0A,
        };



Cheers


sparkvolt

If you sent me a patch or a pull request I would merge it and made a new version. Please try not to break the H340 functionality.

Cheers.


Top
 Profile  
Thanks  
PostPosted: Sat Jan 19, 2013 9:11 am 
Offline
Newbie
Newbie

Joined: Tue Mar 01, 2011 2:39 pm
Posts: 6
Thanks: 4
Thanked: 0 time in 0 post
Hello!

tried that by changing the lines to ur code in led_acerh340.h. Could u please also post the changes for the did_vid part? I ahve no idea to figure that out ;) or better: post the whole led_acerh340.h ;)

The output I get is:

root@server-hh:~/mediasmartserverd# ./mediasmartserverd -a --debug -v -v
LedHpEx48X: Device 0x86
Found: HP MediaSmart Server 48X
device: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
led: 0
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
led: 0
device: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb
led: 1
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb
led: 1
device: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd
led: 2
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd
led: 2
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0

So it still doesn't use the led_acerh340.h

Thanks, Holger


sparkvolt wrote:
Took a little bit of fiddling with stuff, but I have the addresses for H341.

HDD 1 Red : 0x59
HDD 2 Red : 0x58
HDD 3 Red : 0x4E or 0x56
HDD 4 Red : 0x51

HDD 1 Blue : 0x4B or 0x53
HDD 2 Blue : 0x4C or 0x54
HDD 3 Blue : 0x52
HDD 4 Blue : 0x50

i Red : 0x18
i Blue : 0x0A
Power : 0x1B
USB : 0x12

I plugged them into led_acerh340.h and changed detection to accept DID/VID combo from H341 and all LEDs are working flawlessly on my H341:
Code:
/// mappings for LEDs
        enum {
                OUT_BLUE0               = 0x4b,
                OUT_BLUE1               = 0x4c,
                OUT_BLUE2               = 0x52,
                OUT_BLUE3               = 0x50,

                OUT_RED0                = 0x59,
                OUT_RED1                = 0x58,
                OUT_RED2                = 0x4e,
                OUT_RED3                = 0x51,

                //-
                OUT_USB_DEVICE  = 0x06, ///< bit 6

                OUT_USB_LED             = 0x12,
                OUT_POWER               = 0x1b,
                OUT_SYSTEM_RED       = 0x18,
                OUT_SYSTEM_BLUE      = 0x0A,
        };



Cheers


Top
 Profile  
Thanks  
PostPosted: Sun Jan 20, 2013 7:32 am 
Offline
Newbie
Newbie

Joined: Fri Jan 18, 2013 8:21 pm
Posts: 2
Thanks: 0
Thanked: 0 time in 0 post
I'll search the forum too but will appreciate if anybody can refer me to a similar effort to control the ex495 LEDs under freenas.thanks

Sent from my GT-S5360 using Tapatalk 2


Top
 Profile  
Thanks  
PostPosted: Wed Jan 23, 2013 3:08 pm 
Offline
Newbie
Newbie

Joined: Thu Dec 27, 2012 9:01 pm
Posts: 2
Thanks: 0
Thanked: 2 times in 1 post
dg3feh wrote:
Hello!

tried that by changing the lines to ur code in led_acerh340.h. Could u please also post the changes for the did_vid part? I ahve no idea to figure that out ;) or better: post the whole led_acerh340.h ;)

The output I get is:

root@server-hh:~/mediasmartserverd# ./mediasmartserverd -a --debug -v -v
LedHpEx48X: Device 0x86
Found: HP MediaSmart Server 48X
device: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
led: 0
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
led: 0
device: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb
led: 1
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb
led: 1
device: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd
led: 2
ADDED: '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd' (block)
device: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdd
led: 2
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0
0 0 1 0 2 0

So it still doesn't use the led_acerh340.h

Thanks, Holger


sparkvolt wrote:
Took a little bit of fiddling with stuff, but I have the addresses for H341.

HDD 1 Red : 0x59
HDD 2 Red : 0x58
HDD 3 Red : 0x4E or 0x56
HDD 4 Red : 0x51

HDD 1 Blue : 0x4B or 0x53
HDD 2 Blue : 0x4C or 0x54
HDD 3 Blue : 0x52
HDD 4 Blue : 0x50

i Red : 0x18
i Blue : 0x0A
Power : 0x1B
USB : 0x12

I plugged them into led_acerh340.h and changed detection to accept DID/VID combo from H341 and all LEDs are working flawlessly on my H341:
Code:
/// mappings for LEDs
        enum {
                OUT_BLUE0               = 0x4b,
                OUT_BLUE1               = 0x4c,
                OUT_BLUE2               = 0x52,
                OUT_BLUE3               = 0x50,

                OUT_RED0                = 0x59,
                OUT_RED1                = 0x58,
                OUT_RED2                = 0x4e,
                OUT_RED3                = 0x51,

                //-
                OUT_USB_DEVICE  = 0x06, ///< bit 6

                OUT_USB_LED             = 0x12,
                OUT_POWER               = 0x1b,
                OUT_SYSTEM_RED       = 0x18,
                OUT_SYSTEM_BLUE      = 0x0A,
        };



Cheers


The DID/VID for H341 is same as HP EX485. The DID/VID is 0x29168086.

Code:
virtual bool chkPciDeviceVendorId_( unsigned int did_vid ) const {
      // ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
      return ( 0x29168086 == did_vid );
}


Top
 Profile  
Thanks  
The following user would like to thank sparkvolt for this post
dg3feh, K. Hendrik
PostPosted: Thu Feb 14, 2013 5:42 pm 
Offline
Newbie
Newbie

Joined: Sun Oct 24, 2010 6:41 am
Posts: 2
Thanks: 1
Thanked: 2 times in 1 post
sparkvolt thank you for the code. Merelin and I have integrated it into mediasmartserverd and it is now available through his git and ppa.

I also forked his git and added some functionality to the "i" LED. If you run it with the option --update-monitor (-u) the LED will light up
blue if updates are available, purpel if security updates are available and red if a reboot is required (the update rate is currently 15 minutes because i didn't want to check every second for something like this).
This functionality still has to be thoroughly tested though.

If anybody is interested in testing it its available here: https://github.com/kbehren/mediasmartserverd
Bugreports appreciated, preferably directly through github.

EDIT: :!: The update monitor is intended for ubuntu server, it requires update-notifier-common to be installed.


Top
 Profile  
Thanks  
The following user would like to thank K. Hendrik for this post
dg3feh, yakuza
PostPosted: Sun Mar 03, 2013 1:08 pm 
Offline
.5TB storage
.5TB storage

Joined: Thu Apr 01, 2010 5:52 am
Posts: 11
Thanks: 3
Thanked: 6 times in 2 posts
Its been a long time since I've been here and I am amazed to see what happened in between here :)

My trusty H340 works very well but in the meantime, I've outgrown it a little bit. Therefore, I bought a new mainboard (a AsRock Z77E-ITX along with a i3-3220T).

A friend from our company's hw-department (who coincidentially :wink: has the same system) created a small replacement PCB which is driven by a coldfire V1. This CPU will take care of the Enabling of the backplane power, the LED and Fan-control. The PCB is connected to the mainboard via USB and all communication is running over a ttyACM device; I'm currently developing the software daemon.

The PCB is shorter than the original one since then I can put an USB 3.0 connector to the front

I will upload the daemon's sources shortly.


Attachments:
File comment: On top the original PCB on the bottom the newly designed PCB
LP_best_2_klein.JPG
LP_best_2_klein.JPG [ 97.81 KiB | Viewed 26552 times ]
File comment: On top the original PCB on the bottom the newly designed PCB
LP_best_1_klein.JPG
LP_best_1_klein.JPG [ 119.38 KiB | Viewed 26552 times ]
Top
 Profile  
Thanks  
PostPosted: Wed Mar 27, 2013 1:05 pm 
Offline
Newbie
Newbie

Joined: Wed Mar 27, 2013 12:55 pm
Posts: 3
Thanks: 0
Thanked: 0 time in 0 post
So with this replacement PCB we can replace the existing MB and PCB with the ASRock new PCB? Sweet. :beerme:


Top
 Profile  
Thanks  
PostPosted: Sun Mar 31, 2013 12:09 pm 
Offline
Newbie
Newbie

Joined: Sun Mar 31, 2013 11:43 am
Posts: 5
Thanks: 1
Thanked: 0 time in 0 post
Thank you for your work!
There are a few comments:
- I would like to see the mode in which the disk activity shows no red light, but the flashing blue (i.e., on the reverse - is always switched on, during the work is flashing); all the same, the red light - the symbol of the error;
- it would be a good(?) idea to split the code to the kernel module that performs the basic operation and provides a standard interface in /sys, and user-space utility that controls modes.


Top
 Profile  
Thanks  
PostPosted: Sun Mar 31, 2013 12:27 pm 
Offline
Newbie
Newbie

Joined: Sun Mar 31, 2013 11:43 am
Posts: 5
Thanks: 1
Thanked: 0 time in 0 post
alexandergeorg wrote:
created a small replacement PCB which is driven by a coldfire V1.

You will share the PCB schemes? Sure, many people (and myself) thought about it.


Top
 Profile  
Thanks  
PostPosted: Thu Apr 11, 2013 2:15 pm 
Offline
Newbie
Newbie

Joined: Wed Mar 27, 2013 12:55 pm
Posts: 3
Thanks: 0
Thanked: 0 time in 0 post
First off thanks for all the work peeps have done on this program. I have mediasmartserver installed using merelin's ppa on ubuntu 12.04. My server has all 4 drive bays occupied with 1 boot drive and 3 drives in a raid 5. When my system boots, I have no individual drive lights, All I have are the single HD activity light. mediasmartserver is running with the --activity and --update-monitor.
The only way I can get my individual lights to turn on is to use --xmas which gives me purple drive lights but the stay on all the time.
Code:
scott@megalon:~$ sudo mediasmartserverd -v -v  --xmas
--- SystemVendor: "Acer" - ProductName: "Aspire easyStore H340" ---
Recognized SystemVendor: "Acer"
Recognized ProductName: "Aspire easyStore H340"
Found: Acer Aspire easyStore H340
scott@megalon:~$

If I run without the --xmas the lights go out and it just sits there waiting for something, I have to ctrl+c to kill the command. I've tried --activity and --update-monitor. Neither does anything besides --xmas. ](*,)


Top
 Profile  
Thanks  
PostPosted: Thu Apr 11, 2013 2:34 pm 
Offline
1TB storage
1TB storage

Joined: Wed Jan 19, 2011 2:19 am
Posts: 25
Thanks: 0
Thanked: 7 times in 5 posts
MetalGeek wrote:
First off thanks for all the work peeps have done on this program. I have mediasmartserver installed using merelin's ppa on ubuntu 12.04. My server has all 4 drive bays occupied with 1 boot drive and 3 drives in a raid 5. When my system boots, I have no individual drive lights, All I have are the single HD activity light. mediasmartserver is running with the --activity and --update-monitor.
The only way I can get my individual lights to turn on is to use --xmas which gives me purple drive lights but the stay on all the time.
Code:
scott@megalon:~$ sudo mediasmartserverd -v -v  --xmas
--- SystemVendor: "Acer" - ProductName: "Aspire easyStore H340" ---
Recognized SystemVendor: "Acer"
Recognized ProductName: "Aspire easyStore H340"
Found: Acer Aspire easyStore H340
scott@megalon:~$

If I run without the --xmas the lights go out and it just sits there waiting for something, I have to ctrl+c to kill the command. I've tried --activity and --update-monitor. Neither does anything besides --xmas. ](*,)


Please try mediasmartserver 0.5.5-1ubuntu1~quantal from my PPA and give me your feedback.


Top
 Profile  
Thanks  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 121 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group