It is currently Thu Mar 28, 2024 12:42 pm

All times are UTC - 7 hours [ DST ]

Recent News:



Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Jul 10, 2009 1:29 am 
Offline
2.5TB storage
2.5TB storage

Joined: Thu Apr 03, 2008 3:52 pm
Posts: 217
Thanks: 12
Thanked: 61 times in 32 posts
I installed Ubuntu 9.04 Server on my Acer easyStore H340 using my trusted VGA/PS2 cable and the USB-key installation method. Everything worked flawlessly...well kinda. The hard drive LEDs did not work and the status LED was in a continuous blinking state (as expected since these are custom components that require a custom driver). The code that was obtained from reserve engineering of the MediaSmart Server 47x series is not working with the Acer easyStore.

Attachment:
GI0F5858 (Medium).JPG
GI0F5858 (Medium).JPG [ 29.87 KiB | Viewed 46016 times ]


The network card worked out of the box (unlike the horrible NIC experience with the HP MediaSmart 47x series).

I've included a bunch of commands that I ran.

dmesg
Code:
[    0.000000] BIOS EBDA/lowmem at: 0009dc00/0009dc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-server (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 02:48:10 UTC 2009 (Ubuntu 2.6.28-11.42-server)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
[    0.000000]  BIOS-e820: 000000007f5e0000 - 000000007f5e8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f5e8000 - 000000007f5e9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5e9000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x7f5e0 max_arch_pfn = 0x1000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009dc00 (usable)
[    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000cc000 - 00000000000d0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f5e0000 (usable)
[    0.000000]  modified: 000000007f5e0000 - 000000007f5e8000 (ACPI data)
[    0.000000]  modified: 000000007f5e8000 - 000000007f5e9000 (ACPI NVS)
[    0.000000]  modified: 000000007f5e9000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] RAMDISK: 378d6000 - 37fefe72
[    0.000000] Allocated new RAMDISK: 008b4000 - 00fcde72
[    0.000000] Move RAMDISK from 00000000378d6000 - 0000000037fefe71 to 008b4000 - 00fcde71
[    0.000000] ACPI: RSDP 000F77F0, 0024 (r2 PTLTD )
[    0.000000] ACPI: XSDT 7F5E2DF7, 0044 (r1 PTLTD      XSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 7F5E7E40, 00F4 (r3 INTEL            6040000 PTL         3)
[    0.000000] ACPI: DSDT 7F5E2E3B, 4F91 (r1  INTEL LAKEPORT  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 7F5E8FC0, 0040
[    0.000000] ACPI: MCFG 7F5E7F34, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
[    0.000000] ACPI: APIC 7F5E7F70, 0068 (r1 PTLTD      APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 7F5E7FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 00000000 - 377fe000
[    0.000000]   bootmap 00013000 - 00019f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008aae2c]    TEXT DATA BSS ==> [0000100000 - 00008aae2c]
[    0.000000]   #4 [00008ab000 - 00008b4000]    INIT_PG_TABLE ==> [00008ab000 - 00008b4000]
[    0.000000]   #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000]   #7 [00008b4000 - 0000fcde72]      NEW RAMDISK ==> [00008b4000 - 0000fcde72]
[    0.000000]   #8 [0000013000 - 000001a000]          BOOTMAP ==> [0000013000 - 000001a000]
[    0.000000] found SMP MP-table at [c00f7820] 000f7820
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f5e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0007f5e0
[    0.000000] On node 0 totalpages: 521581
[    0.000000] free_area_init_node: node 0, pgdat c06e5480, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292070 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[    0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[    0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517505
[    0.000000] Kernel command line: root=UUID=f6938010-9e30-41a6-aa40-24d6c51735e5 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1599.997 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.010000] allocated 10433600 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Scanning for low memory corruption every 60 seconds
[    0.010000] Memory: 2042772k/2086784k available (4180k kernel code, 42632k reserved, 2255k data, 548k init, 1177480k highmem)
[    0.010000] virtual kernel memory layout:
[    0.010000]     fixmap  : 0xffc78000 - 0xfffff000   (3612 kB)
[    0.010000]     pkmap   : 0xff800000 - 0xffa00000   (2048 kB)
[    0.010000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.010000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.010000]       .init : 0xc0751000 - 0xc07da000   ( 548 kB)
[    0.010000]       .data : 0xc0515003 - 0xc0748fc0   (2255 kB)
[    0.010000]       .text : 0xc0100000 - 0xc0515003   (4180 kB)
[    0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.010018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.99 BogoMIPS (lpj=15999970)
[    0.010057] Security Framework initialized
[    0.010067] SELinux:  Disabled at boot.
[    0.010108] AppArmor: AppArmor initialized
[    0.010124] Mount-cache hash table entries: 512
[    0.010344] Initializing cgroup subsys ns
[    0.010353] Initializing cgroup subsys cpuacct
[    0.010359] Initializing cgroup subsys memory
[    0.010368] Initializing cgroup subsys freezer
[    0.010391] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.010396] CPU: L2 cache: 512K
[    0.010401] CPU: Physical Processor ID: 0
[    0.010405] CPU: Processor Core ID: 0
[    0.010411] using mwait in idle threads.
[    0.010427] Checking 'hlt' instruction... OK.
[    0.053910] ACPI: Core revision 20080926
[    0.056265] ACPI: Checking initramfs for custom DSDT
[    0.510584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.614393] CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
[    0.620000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 3200.16 BogoMIPS (lpj=16000838)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.010000] CPU: L2 cache: 512K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 0
[    0.770278] CPU1: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
[    0.770303] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.780065] Brought up 2 CPUs
[    0.780072] Total of 2 processors activated (6400.16 BogoMIPS).
[    0.780137] CPU0 attaching sched-domain:
[    0.780142]  domain 0: span 0-1 level SIBLING
[    0.780147]   groups: 0 1
[    0.780157] CPU1 attaching sched-domain:
[    0.780162]  domain 0: span 0-1 level SIBLING
[    0.780166]   groups: 1 0
[    0.780297] net_namespace: 776 bytes
[    0.780297] Booting paravirtualized kernel on bare hardware
[    0.780707] Time: 13:17:19  Date: 07/06/09
[    0.780707] regulator: core version 0.5
[    0.780707] NET: Registered protocol family 16
[    0.780707] EISA bus registered
[    0.780707] ACPI: bus type pci registered
[    0.780707] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
[    0.780707] PCI: Using MMCONFIG for extended config space
[    0.780707] PCI: Using configuration type 1 for base access
[    0.782158] ACPI: EC: Look up EC in DSDT
[    0.790148] ACPI: Interpreter enabled
[    0.790160] ACPI: (supports S0 S1 S3 S5)
[    0.790175] ACPI: Using IOAPIC for interrupt routing
[    0.796679] ACPI: No dock devices found.
[    0.796703] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.796831] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[    0.796840] pci 0000:00:02.0: reg 14 io port: [0x18d0-0x18d7]
[    0.796849] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    0.796857] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0080000-0xf00bffff]
[    0.796956] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.796963] pci 0000:00:1c.0: PME# disabled
[    0.797021] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.797028] pci 0000:00:1c.1: PME# disabled
[    0.797086] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.797093] pci 0000:00:1c.2: PME# disabled
[    0.797151] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.797158] pci 0000:00:1c.3: PME# disabled
[    0.797217] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.797224] pci 0000:00:1c.4: PME# disabled
[    0.797281] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.797288] pci 0000:00:1c.5: PME# disabled
[    0.797343] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.797399] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.797457] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.797515] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.797578] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf02c0000-0xf02c03ff]
[    0.797625] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.797632] pci 0000:00:1d.7: PME# disabled
[    0.797787] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.797798] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.797805] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.797856] pci 0000:00:1f.2: reg 10 io port: [0x18e8-0x18ef]
[    0.797866] pci 0000:00:1f.2: reg 14 io port: [0x18dc-0x18df]
[    0.797875] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7]
[    0.797884] pci 0000:00:1f.2: reg 1c io port: [0x18d8-0x18db]
[    0.797894] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[    0.797903] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf02c0400-0xf02c07ff]
[    0.797923] pci 0000:00:1f.2: PME# supported from D3hot
[    0.797930] pci 0000:00:1f.2: PME# disabled
[    0.797986] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[    0.798060] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[    0.798116] pci 0000:00:1c.1: bridge io port: [0x00-0xfff]
[    0.798171] pci 0000:00:1c.2: bridge io port: [0x00-0xfff]
[    0.798225] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[    0.798303] pci 0000:09:00.0: reg 10 64bit mmio: [0xf0300000-0xf0303fff]
[    0.798315] pci 0000:09:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.798348] pci 0000:09:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.798363] pci 0000:09:00.0: supports D1 D2
[    0.798367] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.798375] pci 0000:09:00.0: PME# disabled
[    0.798426] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[    0.798433] pci 0000:00:1c.4: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[    0.798494] pci 0000:0a:00.0: reg 10 io port: [0x3020-0x3027]
[    0.798506] pci 0000:0a:00.0: reg 14 io port: [0x3014-0x3017]
[    0.798517] pci 0000:0a:00.0: reg 18 io port: [0x3018-0x301f]
[    0.798529] pci 0000:0a:00.0: reg 1c io port: [0x3010-0x3013]
[    0.798541] pci 0000:0a:00.0: reg 20 io port: [0x3000-0x300f]
[    0.798553] pci 0000:0a:00.0: reg 24 32bit mmio: [0xf0400000-0xf04003ff]
[    0.798577] pci 0000:0a:00.0: supports D1
[    0.798581] pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
[    0.798589] pci 0000:0a:00.0: PME# disabled
[    0.798645] pci 0000:00:1c.5: bridge io port: [0x3000-0x3fff]
[    0.798652] pci 0000:00:1c.5: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[    0.798713] pci 0000:00:1e.0: transparent bridge
[    0.798761] bus 00 -> node 0
[    0.798775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.799417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.799675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.800135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.800398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.800654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[    0.800910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    0.801165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.809591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7
[    0.809792] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
[    0.809990] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
[    0.810196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
[    0.810409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[    0.810615] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[    0.810830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    0.811039] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5
[    0.811304] ACPI: WMI: Mapper loaded
[    0.811429] SCSI subsystem initialized
[    0.811429] libata version 3.00 loaded.
[    0.811429] usbcore: registered new interface driver usbfs
[    0.811429] usbcore: registered new interface driver hub
[    0.811429] usbcore: registered new device driver usb
[    0.811429] PCI: Using ACPI for IRQ routing
[    0.811429] pci 0000:00:1c.0: BAR 7: can't allocate resource
[    0.811429] pci 0000:00:1c.1: BAR 7: can't allocate resource
[    0.811429] pci 0000:00:1c.2: BAR 7: can't allocate resource
[    0.811429] pci 0000:00:1c.3: BAR 7: can't allocate resource
[    0.830019] Bluetooth: Core ver 2.13
[    0.830057] NET: Registered protocol family 31
[    0.830057] Bluetooth: HCI device and connection manager initialized
[    0.830057] Bluetooth: HCI socket layer initialized
[    0.830057] NET: Registered protocol family 8
[    0.830057] NET: Registered protocol family 20
[    0.830077] NetLabel: Initializing
[    0.830081] NetLabel:  domain hash size = 128
[    0.830084] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.830108] NetLabel:  unlabeled traffic allowed by default
[    0.830287] hpet clockevent registered
[    0.830294] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.830303] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.830312] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.840110] AppArmor: AppArmor Filesystem Enabled
[    0.860019] pnp: PnP ACPI init
[    0.860044] ACPI: bus type pnp registered
[    0.864868] pnp: PnP ACPI: found 10 devices
[    0.864874] ACPI: ACPI bus type pnp unregistered
[    0.864881] PnPBIOS: Disabled by ACPI PNP
[    0.864904] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.864910] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.864916] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.864922] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.864929] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.864936] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.864943] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[    0.864949] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.864956] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.864962] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[    0.899932] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.899938] pci 0000:00:1c.0:   IO window: disabled
[    0.899946] pci 0000:00:1c.0:   MEM window: disabled
[    0.899952] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.899961] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.899965] pci 0000:00:1c.1:   IO window: disabled
[    0.899972] pci 0000:00:1c.1:   MEM window: disabled
[    0.899978] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.899987] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[    0.899991] pci 0000:00:1c.2:   IO window: disabled
[    0.899999] pci 0000:00:1c.2:   MEM window: disabled
[    0.900011] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.900020] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[    0.900024] pci 0000:00:1c.3:   IO window: disabled
[    0.900031] pci 0000:00:1c.3:   MEM window: disabled
[    0.900037] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.900050] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[    0.900056] pci 0000:00:1c.4:   IO window: 0x2000-0x2fff
[    0.900064] pci 0000:00:1c.4:   MEM window: 0xf0300000-0xf03fffff
[    0.900072] pci 0000:00:1c.4:   PREFETCH window: 0x00000088000000-0x000000880fffff
[    0.900082] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a
[    0.900088] pci 0000:00:1c.5:   IO window: 0x3000-0x3fff
[    0.900096] pci 0000:00:1c.5:   MEM window: 0xf0400000-0xf04fffff
[    0.900102] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.900111] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b
[    0.900115] pci 0000:00:1e.0:   IO window: disabled
[    0.900122] pci 0000:00:1e.0:   MEM window: disabled
[    0.900128] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.900154] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.900164] pci 0000:00:1c.0: setting latency timer to 64
[    0.900178] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.900187] pci 0000:00:1c.1: setting latency timer to 64
[    0.900200] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.900208] pci 0000:00:1c.2: setting latency timer to 64
[    0.900221] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.900230] pci 0000:00:1c.3: setting latency timer to 64
[    0.900241] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.900248] pci 0000:00:1c.4: setting latency timer to 64
[    0.900259] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.900266] pci 0000:00:1c.5: setting latency timer to 64
[    0.900276] pci 0000:00:1e.0: setting latency timer to 64
[    0.900283] bus: 00 index 0 io port: [0x00-0xffff]
[    0.900288] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.900293] bus: 02 index 0 mmio: [0x0-0xfff]
[    0.900297] bus: 02 index 1 mmio: [0x0-0x0]
[    0.900301] bus: 02 index 2 mmio: [0x0-0x0]
[    0.900305] bus: 02 index 3 mmio: [0x0-0x0]
[    0.900309] bus: 04 index 0 mmio: [0x0-0xfff]
[    0.900313] bus: 04 index 1 mmio: [0x0-0x0]
[    0.900317] bus: 04 index 2 mmio: [0x0-0x0]
[    0.900321] bus: 04 index 3 mmio: [0x0-0x0]
[    0.900325] bus: 06 index 0 mmio: [0x0-0xfff]
[    0.900329] bus: 06 index 1 mmio: [0x0-0x0]
[    0.900333] bus: 06 index 2 mmio: [0x0-0x0]
[    0.900337] bus: 06 index 3 mmio: [0x0-0x0]
[    0.900341] bus: 08 index 0 mmio: [0x0-0xfff]
[    0.900345] bus: 08 index 1 mmio: [0x0-0x0]
[    0.900348] bus: 08 index 2 mmio: [0x0-0x0]
[    0.900352] bus: 08 index 3 mmio: [0x0-0x0]
[    0.900357] bus: 09 index 0 io port: [0x2000-0x2fff]
[    0.900361] bus: 09 index 1 mmio: [0xf0300000-0xf03fffff]
[    0.900367] bus: 09 index 2 mmio: [0x88000000-0x880fffff]
[    0.900373] bus: 09 index 3 mmio: [0x0-0x0]
[    0.900379] bus: 0a index 0 io port: [0x3000-0x3fff]
[    0.900383] bus: 0a index 1 mmio: [0xf0400000-0xf04fffff]
[    0.900388] bus: 0a index 2 mmio: [0x0-0x0]
[    0.900392] bus: 0a index 3 mmio: [0x0-0x0]
[    0.900396] bus: 0b index 0 mmio: [0x0-0x0]
[    0.900400] bus: 0b index 1 mmio: [0x0-0x0]
[    0.900404] bus: 0b index 2 mmio: [0x0-0x0]
[    0.900408] bus: 0b index 3 io port: [0x00-0xffff]
[    0.900412] bus: 0b index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.900433] NET: Registered protocol family 2
[    0.940126] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.940659] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.941542] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.942052] TCP: Hash tables configured (established 131072 bind 65536)
[    0.942059] TCP reno registered
[    0.960193] NET: Registered protocol family 1
[    0.960422] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    1.340032] Switched to high resolution mode on CPU 0
[    1.404999]  it is
[    1.899113] Freeing initrd memory: 7271k freed
[    1.899180] Simple Boot Flag at 0x36 set to 0x1
[    1.899513] cpufreq: No nForce2 chipset.
[    1.899772] audit: initializing netlink socket (disabled)
[    1.899812] type=2000 audit(1246886238.892:1): initialized
[    1.914662] highmem bounce pool size: 64 pages
[    1.914672] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.917259] VFS: Disk quotas dquot_6.5.1
[    1.917383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.918667] fuse init (API version 7.10)
[    1.918840] msgmni has been set to 1706
[    1.919193] alg: No test for stdrng (krng)
[    1.919225] io scheduler noop registered
[    1.919230] io scheduler anticipatory registered
[    1.919235] io scheduler deadline registered (default)
[    1.919273] io scheduler cfq registered
[    1.919296] pci 0000:00:02.0: Boot video device
[    1.919462] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.919697] ACPI Warning (nspredef-0252): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, expected 4 [20080926]
[    1.922334] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.922377] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.922414] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[    1.922430] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.922463] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.922489] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.922583] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.922623] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.922653] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[    1.922669] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.922696] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.922722] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.922798] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.922838] pcieport-driver 0000:00:1c.2: found MSI capability
[    1.922867] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[    1.922883] pci_express 0000:00:1c.2:pcie00: allocate port service
[    1.922910] pci_express 0000:00:1c.2:pcie02: allocate port service
[    1.922938] pci_express 0000:00:1c.2:pcie03: allocate port service
[    1.923021] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.923060] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.923090] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[    1.923105] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.923138] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.923166] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.923243] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.923283] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.923312] pcieport-driver 0000:00:1c.4: irq 2299 for MSI/MSI-X
[    1.923327] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.923356] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.923390] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.923469] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.923509] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.923538] pcieport-driver 0000:00:1c.5: irq 2298 for MSI/MSI-X
[    1.923554] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.923584] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.923613] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.923718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.923742] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.924040] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.924325] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.924604] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.924886] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.925164] ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
[    1.925446] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.925696] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.925702] ACPI: Power Button (FF) [PWRF]
[    1.925810] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
[    1.925822] ACPI: Power Button (CM) [PWRB]
[    1.926428] ACPI: CPU0 (power states: C1[C1] C3[C3])
[    1.926481] processor ACPI_CPU:00: registered as cooling_device0
[    1.926723] ACPI: CPU1 (power states: C1[C1] C3[C3])
[    1.926759] processor ACPI_CPU:01: registered as cooling_device1
[    1.929195] isapnp: Scanning for PnP cards...
[    2.285133] isapnp: No Plug & Play device found
[    2.302774] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.302915] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.303436] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.304876] brd: module loaded
[    2.305515] loop: module loaded
[    2.305665] Fixed MDIO Bus: probed
[    2.305678] PPP generic driver version 2.4.2
[    2.305806] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    2.305865] Driver 'sd' needs updating - please use bus_type methods
[    2.305885] Driver 'sr' needs updating - please use bus_type methods
[    2.305968] ahci 0000:00:1f.2: version 3.0
[    2.305992] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.306076] ahci 0000:00:1f.2: irq 2297 for MSI/MSI-X
[    2.306168] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.306175] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    2.306183] ahci 0000:00:1f.2: setting latency timer to 64
[    2.306811] scsi0 : ahci
[    2.307072] scsi1 : ahci
[    2.307198] scsi2 : ahci
[    2.307327] scsi3 : ahci
[    2.307422] ata1: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0500 irq 2297
[    2.307429] ata2: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0580 irq 2297
[    2.307435] ata3: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0600 irq 2297
[    2.307441] ata4: SATA max UDMA/133 abar m1024@0xf02c0400 port 0xf02c0680 irq 2297
[    2.650033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.692941] ata1.00: ATA-7: ST3300620AS, 3.AAE, max UDMA/133
[    2.692947] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.751283] ata1.00: configured for UDMA/133
[    3.120039] ata2: SATA link down (SStatus 0 SControl 300)
[    3.490027] ata3: SATA link down (SStatus 0 SControl 300)
[    3.860028] ata4: SATA link down (SStatus 0 SControl 300)
[    3.880201] scsi 0:0:0:0: Direct-Access     ATA      ST3300620AS      3.AA PQ: 0 ANSI: 5
[    3.880417] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors: (300 GB/279 GiB)
[    3.880459] sd 0:0:0:0: [sda] Write Protect is off
[    3.880465] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.880532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.880678] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors: (300 GB/279 GiB)
[    3.880717] sd 0:0:0:0: [sda] Write Protect is off
[    3.880722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.880789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.880798]  sda: sda1 sda2 < sda5 >
[    3.922587] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.922686] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.923624] pata_marvell 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.923680] pata_marvell 0000:0a:00.0: setting latency timer to 64
[    3.923828] scsi4 : pata_marvell
[    3.923978] scsi5 : pata_marvell
[    3.924068] ata5: PATA max UDMA/100 cmd 0x3020 ctl 0x3014 bmdma 0x3000 irq 17
[    3.924074] ata6: PATA max UDMA/133 cmd 0x3018 ctl 0x3010 bmdma 0x3008 irq 17
[    4.261918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.261966] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.261999] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.262006] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.262128] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    4.266036] ehci_hcd 0000:00:1d.7: debug port 1
[    4.266046] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.266073] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf02c0000
[    4.280030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.280184] usb usb1: configuration #1 chosen from 1 choice
[    4.280239] hub 1-0:1.0: USB hub found
[    4.280255] hub 1-0:1.0: 8 ports detected
[    4.280464] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.280504] uhci_hcd: USB Universal Host Controller Interface driver
[    4.280571] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.280585] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.280591] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.280680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.280711] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    4.280864] usb usb2: configuration #1 chosen from 1 choice
[    4.280918] hub 2-0:1.0: USB hub found
[    4.280932] hub 2-0:1.0: 2 ports detected
[    4.281091] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.281106] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.281112] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.281195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    4.281237] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    4.281391] usb usb3: configuration #1 chosen from 1 choice
[    4.281443] hub 3-0:1.0: USB hub found
[    4.281457] hub 3-0:1.0: 2 ports detected
[    4.281617] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.281628] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.281633] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.281720] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    4.281762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    4.281913] usb usb4: configuration #1 chosen from 1 choice
[    4.281966] hub 4-0:1.0: USB hub found
[    4.281979] hub 4-0:1.0: 2 ports detected
[    4.282133] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    4.282144] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    4.282150] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.282234] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    4.282276] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    4.282426] usb usb5: configuration #1 chosen from 1 choice
[    4.282479] hub 5-0:1.0: USB hub found
[    4.282493] hub 5-0:1.0: 2 ports detected
[    4.282755] usbcore: registered new interface driver libusual
[    4.282824] usbcore: registered new interface driver usbserial
[    4.282845] USB Serial support registered for generic
[    4.282876] usbcore: registered new interface driver usbserial_generic
[    4.282881] usbserial: USB Serial Driver core
[    4.282962] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    4.285543] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.285557] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.290136] mice: PS/2 mouse device common for all mice
[    4.320156] rtc_cmos 00:04: RTC can wake from S4
[    4.320230] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.320267] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.320416] device-mapper: uevent: version 1.0.3
[    4.320616] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.320784] device-mapper: multipath: version 1.0.5 loaded
[    4.320790] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.320981] EISA: Probing bus 0 at eisa.0
[    4.320992] Cannot allocate resource for EISA slot 1
[    4.320998] Cannot allocate resource for EISA slot 2
[    4.321004] Cannot allocate resource for EISA slot 3
[    4.321032] EISA: Detected 0 cards.
[    4.321223] cpuidle: using governor ladder
[    4.321348] cpuidle: using governor menu
[    4.322410] TCP cubic registered
[    4.322698] NET: Registered protocol family 10
[    4.323558] lo: Disabled Privacy Extensions
[    4.324232] NET: Registered protocol family 17
[    4.324274] Bluetooth: L2CAP ver 2.11
[    4.324278] Bluetooth: L2CAP socket layer initialized
[    4.324283] Bluetooth: SCO (Voice Link) ver 0.6
[    4.324287] Bluetooth: SCO socket layer initialized
[    4.324364] Bluetooth: RFCOMM socket layer initialized
[    4.324380] Bluetooth: RFCOMM TTY layer initialized
[    4.324383] Bluetooth: RFCOMM ver 1.10
[    4.324497] Using IPI No-Shortcut mode
[    4.324678] registered taskstats version 1
[    4.324918]   Magic number: 1:553:280
[    4.324958] tty tty17: hash matches
[    4.325033] rtc_cmos 00:04: setting system clock to 2009-07-06 13:17:22 UTC (1246886242)
[    4.325041] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.325045] EDD information not available.
[    4.325499] Freeing unused kernel memory: 548k freed
[    4.325731] Write protecting the kernel text: 4184k
[    4.325885] Write protecting the kernel read-only data: 1552k
[    4.339182] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.722714] usb 1-8: new high speed USB device using ehci_hcd and address 4
[    4.749290] sky2 driver version 1.22
[    4.749388] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.749413] sky2 0000:09:00.0: setting latency timer to 64
[    4.749545] sky2 0000:09:00.0: Yukon-2 Extreme chip revision 2
[    4.781778] sky2 0000:09:00.0: Marvell Yukon 88E8071 Gigabit Ethernet Controller
[    4.781789]  Part Number: Yukon 88E8071
[    4.781794]  Engineering Level: Rev. 1.6
[    4.781799]  Manufacturer: Marvell
[    4.781890] sky2 0000:09:00.0: irq 2296 for MSI/MSI-X
[    4.783722] sky2 eth0: addr 00:0a:e4:8b:b0:1f
[    4.883414] usb 1-8: configuration #1 chosen from 1 choice
[    4.897291] Initializing USB Mass Storage driver...
[    4.919300] scsi6 : SCSI emulation for USB Mass Storage devices
[    4.925714] usbcore: registered new interface driver usb-storage
[    4.925727] USB Mass Storage support registered.
[    4.925978] usb-storage: device found at 4
[    4.925984] usb-storage: waiting for device to settle before scanning
[    5.170083] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    5.282434] PM: Starting manual resume from disk
[    5.282443] PM: Resume from partition 8:5
[    5.282447] PM: Checking hibernation image.
[    5.282632] PM: Resume from disk failed.
[    5.336024] kjournald starting.  Commit interval 5 seconds
[    5.336039] EXT3-fs: mounted filesystem with ordered data mode.
[    5.345982] usb 2-1: configuration #1 chosen from 1 choice
[    5.364982] usbcore: registered new interface driver hiddev
[    5.382391] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[    5.384016] generic-usb 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[    5.384055] usbcore: registered new interface driver usbhid
[    5.384062] usbhid: v2.6:USB HID core driver
[    5.620040] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    5.797980] usb 2-2: configuration #1 chosen from 1 choice
[    7.208811] udev: starting version 141
[    7.586049] Linux agpgart interface v0.103
[    7.608071] intel_rng: FWH not detected
[    7.641978] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    7.676900] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[    7.677222] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    7.680294] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    7.719356] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    7.720327] dell 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-2/input0
[    7.914491] iTCO_vendor_support: vendor-support=0
[    7.933949] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[    7.958630] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    7.958905] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
[    7.959031] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.983244] acer-wmi: Acer Laptop ACPI-WMI Extras
[    7.983277] acer-wmi: No or unsupported WMI interface, unable to load
[    8.430819] psmouse serio1: ID: 00 00 3c<6>lp: driver loaded but no devices found
[    8.824842] Adding 6008268k swap on /dev/sda5.  Priority:-1 extents:1 across:6008268k
[    9.097824] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[    9.343479] EXT3 FS on sda1, internal journal
[    9.928556] usb-storage: device scan complete
[    9.929148] scsi 6:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 0 CCS
[    9.932646] sd 6:0:0:0: [sdb] 501760 512-byte hardware sectors: (256 MB/245 MiB)
[    9.933887] sd 6:0:0:0: [sdb] Write Protect is off
[    9.933898] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    9.933905] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    9.934882] sd 6:0:0:0: [sdb] 501760 512-byte hardware sectors: (256 MB/245 MiB)
[    9.935622] sd 6:0:0:0: [sdb] Write Protect is off
[    9.935629] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    9.935633] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    9.935689]  sdb: sdb1
[    9.936508] sd 6:0:0:0: [sdb] Attached SCSI disk
[    9.936697] sd 6:0:0:0: Attached scsi generic sg1 type 0
[   10.484397] type=1505 audit(1246904248.654:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1824
[   10.484679] type=1505 audit(1246904248.654:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1824
[   10.484790] type=1505 audit(1246904248.654:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1824
[   10.484895] type=1505 audit(1246904248.654:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1824
[   10.566613] type=1505 audit(1246904248.737:6): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=1829
[   10.653521] type=1505 audit(1246904248.824:7): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1836
[   11.101374] sky2 eth0: enabling interface
[   11.101904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.822164] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   12.822563] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.170014] eth0: no IPv6 routers present
[   33.706870] padlock: VIA PadLock not detected.



ls /proc/cpuinfo
Code:
processor   : 0
vendor_id   : GenuineIntel
cpu family   : 6
model      : 28
model name   : Intel(R) Atom(TM) CPU  230   @ 1.60GHz
stepping   : 2
cpu MHz      : 1600.005
cache size   : 512 KB
physical id   : 0
siblings   : 2
core id      : 0
cpu cores   : 1
apicid      : 0
initial apicid   : 0
fdiv_bug   : no
hlt_bug      : no
f00f_bug   : no
coma_bug   : no
fpu      : yes
fpu_exception   : yes
cpuid level   : 10
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm lahf_lm
bogomips   : 3200.01
clflush size   : 64
power management:

processor   : 1
vendor_id   : GenuineIntel
cpu family   : 6
model      : 28
model name   : Intel(R) Atom(TM) CPU  230   @ 1.60GHz
stepping   : 2
cpu MHz      : 1600.005
cache size   : 512 KB
physical id   : 0
siblings   : 2
core id      : 0
cpu cores   : 1
apicid      : 1
initial apicid   : 1
fdiv_bug   : no
hlt_bug      : no
f00f_bug   : no
coma_bug   : no
fpu      : yes
fpu_exception   : yes
cpuid level   : 10
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm lahf_lm
bogomips   : 3200.16
clflush size   : 64
power management:


ls /proc/meminfo
Code:
MemTotal:        2051512 kB
MemFree:         1916244 kB
Buffers:            6372 kB
Cached:            79780 kB
SwapCached:            0 kB
Active:            51956 kB
Inactive:          60312 kB
Active(anon):      28972 kB
Inactive(anon):        0 kB
Active(file):      22984 kB
Inactive(file):    60312 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       1177480 kB
HighFree:        1065780 kB
LowTotal:         874032 kB
LowFree:          850464 kB
SwapTotal:       6008268 kB
SwapFree:        6008268 kB
Dirty:                12 kB
Writeback:             0 kB
AnonPages:         26116 kB
Mapped:            14348 kB
Slab:               8620 kB
SReclaimable:       3712 kB
SUnreclaim:         4908 kB
PageTables:         1112 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     7034024 kB
Committed_AS:     228196 kB
VmallocTotal:     122880 kB
VmallocUsed:        4760 kB
VmallocChunk:     117204 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:       10232 kB
DirectMap2M:      899072 kB


ls /proc/iomem
Code:
00000000-0000ffff : reserved
00010000-0009dbff : System RAM
0009dc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cb000-000cbfff : Adapter ROM
000cc000-000cffff : reserved
  000cc800-000ccbff : Adapter ROM
000dc000-000dffff : reserved
000e4000-000fffff : reserved
  000f0000-000fffff : System ROM
00100000-7f5dffff : System RAM
  00100000-00515002 : Kernel code
  00515003-00748fbf : Kernel data
  007da000-008aae2b : Kernel bss
7f5e0000-7f5e7fff : ACPI Tables
7f5e8000-7f5e8fff : ACPI Non-volatile Storage
7f5e9000-7fffffff : reserved
88000000-880fffff : PCI Bus 0000:09
  88000000-8801ffff : 0000:09:00.0
d0000000-dfffffff : 0000:00:02.0
e0000000-efffffff : PCI MMCONFIG 0
  e0000000-efffffff : pnp 00:01
f0000000-f007ffff : 0000:00:02.0
f0080000-f00bffff : 0000:00:02.0
f02c0000-f02c03ff : 0000:00:1d.7
  f02c0000-f02c03ff : ehci_hcd
f02c0400-f02c07ff : 0000:00:1f.2
  f02c0400-f02c07ff : ahci
f0300000-f03fffff : PCI Bus 0000:09
  f0300000-f0303fff : 0000:09:00.0
    f0300000-f0303fff : sky2
f0400000-f04fffff : PCI Bus 0000:0a
  f0400000-f04003ff : 0000:0a:00.0
fec00000-fec0ffff : reserved
  fec00000-fec00fff : IOAPIC 0
fed13000-fed13fff : pnp 00:01
fed14000-fed17fff : pnp 00:01
fed45000-fed8ffff : pnp 00:01
fee00000-fee00fff : Local APIC
  fee00000-fee00fff : reserved
fef00000-feffffff : pnp 00:01
ff000000-ffffffff : reserved


ls /proc/ioports
Code:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
03f8-03ff : serial
04d0-04d1 : pnp 00:01
0800-087f : pnp 00:01
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
  1000-107f : pnp 00:01
    1000-1003 : ACPI PM1a_EVT_BLK
    1004-1005 : ACPI PM1a_CNT_BLK
    1008-100b : ACPI PM_TMR
    1010-1015 : ACPI CPU throttle
    1020-1020 : ACPI PM2_CNT_BLK
    1028-102f : ACPI GPE0_BLK
    1030-1033 : iTCO_wdt
    1060-107f : iTCO_wdt
1180-11bf : 0000:00:1f.0
  1180-11bf : pnp 00:01
1820-183f : 0000:00:1d.0
  1820-183f : uhci_hcd
1840-185f : 0000:00:1d.1
  1840-185f : uhci_hcd
1860-187f : 0000:00:1d.2
  1860-187f : uhci_hcd
1880-189f : 0000:00:1d.3
  1880-189f : uhci_hcd
18a0-18bf : 0000:00:1f.3
18c0-18cf : 0000:00:1f.2
  18c0-18cf : ahci
18d0-18d7 : 0000:00:02.0
18d8-18db : 0000:00:1f.2
  18d8-18db : ahci
18dc-18df : 0000:00:1f.2
  18dc-18df : ahci
18e0-18e7 : 0000:00:1f.2
  18e0-18e7 : ahci
18e8-18ef : 0000:00:1f.2
  18e8-18ef : ahci
2000-2fff : PCI Bus 0000:09
  2000-20ff : 0000:09:00.0
    2000-20ff : sky2
3000-3fff : PCI Bus 0000:0a
  3000-300f : 0000:0a:00.0
    3000-300f : pata_marvell
  3010-3013 : 0000:0a:00.0
    3010-3013 : pata_marvell
  3014-3017 : 0000:0a:00.0
    3014-3017 : pata_marvell
  3018-301f : 0000:0a:00.0
    3018-301f : pata_marvell
  3020-3027 : 0000:0a:00.0
    3020-3027 : pata_marvell
fe00-fe00 : pnp 00:01


lspci
Code:
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)
0a:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)


top
Code:
top - 12:59:58 up 9 min,  1 user,  load average: 0.03, 0.05, 0.04
Tasks:  87 total,   1 running,  86 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.8%us,  0.6%sy,  0.0%ni, 97.7%id,  0.9%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   2051512k total,   113656k used,  1937856k free,     5232k buffers
Swap:  6008268k total,        0k used,  6008268k free,    60816k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND           
 2746 ckalapat  20   0  2444 1052  824 R    2  0.1   0:00.02 top               
    1 root      20   0  3084 1884  564 S    0  0.1   0:01.77 init               
    2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd           
    3 root      RT  -5     0    0    0 S    0  0.0   0:00.00 migration/0       
    4 root      15  -5     0    0    0 S    0  0.0   0:00.03 ksoftirqd/0       
    5 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/0         
    6 root      RT  -5     0    0    0 S    0  0.0   0:00.00 migration/1       
    7 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksoftirqd/1       
    8 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/1         
    9 root      15  -5     0    0    0 S    0  0.0   0:00.00 events/0           
   10 root      15  -5     0    0    0 S    0  0.0   0:00.00 events/1           
   11 root      15  -5     0    0    0 S    0  0.0   0:00.00 khelper           
   12 root      RT  -5     0    0    0 S    0  0.0   0:00.00 kstop/0           
   13 root      RT  -5     0    0    0 S    0  0.0   0:00.00 kstop/1           
   14 root      15  -5     0    0    0 S    0  0.0   0:00.00 kintegrityd/0     
   15 root      15  -5     0    0    0 S    0  0.0   0:00.00 kintegrityd/1     
   16 root      15  -5     0    0    0 S    0  0.0   0:00.00 kblockd/0         
   17 root      15  -5     0    0    0 S    0  0.0   0:00.00 kblockd/1         
   18 root      15  -5     0    0    0 S    0  0.0   0:00.00 kacpid             
   19 root      15  -5     0    0    0 S    0  0.0   0:00.00 kacpi_notify       
   20 root      15  -5     0    0    0 S    0  0.0   0:00.00 cqueue             
   21 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata/0             
   22 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata/1             
   23 root      15  -5     0    0    0 S    0  0.0   0:00.00 ata_aux           
   24 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksuspend_usbd     
   25 root      15  -5     0    0    0 S    0  0.0   0:00.00 khubd             
   26 root      15  -5     0    0    0 S    0  0.0   0:00.00 kseriod           
   27 root      15  -5     0    0    0 S    0  0.0   0:00.00 kmmcd             
   28 root      15  -5     0    0    0 S    0  0.0   0:00.00 btaddconn         
   29 root      15  -5     0    0    0 S    0  0.0   0:00.00 btdelconn         
   30 root      20   0     0    0    0 S    0  0.0   0:00.00 pdflush           
   31 root      20   0     0    0    0 S    0  0.0   0:00.00 pdflush           
   32 root      15  -5     0    0    0 S    0  0.0   0:00.00 kswapd0           
   33 root      15  -5     0    0    0 S    0  0.0   0:00.00 aio/0             
   34 root      15  -5     0    0    0 S    0  0.0   0:00.00 aio/1             
   35 root      15  -5     0    0    0 S    0  0.0   0:00.00 ecryptfs-kthrea   
   38 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_0         
   39 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_1         
   40 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_2         
   41 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_3         
   42 root      15  -5     0    0    0 S    0  0.0   0:00.01 scsi_eh_4         
   43 root      15  -5     0    0    0 S    0  0.0   0:00.01 scsi_eh_5         
   44 root      15  -5     0    0    0 S    0  0.0   0:00.00 kstriped           
   45 root      15  -5     0    0    0 S    0  0.0   0:00.00 kmpathd/0         
   46 root      15  -5     0    0    0 S    0  0.0   0:00.00 kmpathd/1         
   47 root      15  -5     0    0    0 S    0  0.0   0:00.00 kmpath_handlerd   
   48 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksnapd             
   49 root      15  -5     0    0    0 S    0  0.0   0:00.00 kondemand/0       
   50 root      15  -5     0    0    0 S    0  0.0   0:00.00 kondemand/1       
   51 root      10 -10     0    0    0 S    0  0.0   0:00.00 krfcommd           
  414 root      15  -5     0    0    0 S    0  0.0   0:00.00 scsi_eh_6         
  421 root      15  -5     0    0    0 S    0  0.0   0:00.00 usb-storage       
  689 root      15  -5     0    0    0 S    0  0.0   0:00.00 kjournald         
  819 root      16  -4  2224  532  316 S    0  0.0   0:00.25 udevd             
 1344 root      15  -5     0    0    0 S    0  0.0   0:00.00 kpsmoused         
 2033 root      20   0  1808  524  460 S    0  0.0   0:00.01 getty             
 2034 root      20   0  1808  528  460 S    0  0.0   0:00.01 getty             
 2037 root      20   0  1808  532  460 S    0  0.0   0:00.01 getty             
 2040 root      20   0  1808  532  460 S    0  0.0   0:00.00 getty             
 2041 root      20   0  1808  528  460 S    0  0.0   0:00.00 getty             
 2103 root      20   0  1808  580  496 S    0  0.0   0:00.00 acpid             
 2138 syslog    20   0  2040  680  540 S    0  0.0   0:00.09 syslogd           
 2156 root      20   0  1968  536  440 S    0  0.0   0:00.19 dd                 
 2158 klog      20   0  3488 2268  444 S    0  0.1   0:00.30 klogd             
 2176 messageb  20   0  2672  800  600 S    0  0.0   0:00.01 dbus-daemon       
 2243 root      20   0  1872  548  464 S    0  0.0   0:00.01 mysqld_safe       
 2285 mysql     20   0  124m  16m 4908 S    0  0.8   0:00.43 mysqld             
 2286 root      20   0  1792  568  492 S    0  0.0   0:00.01 logger             
 2371 root      20   0  7212 1268  776 S    0  0.1   0:00.01 nmbd               
 2384 root      20   0 13016 2868 2204 S    0  0.1   0:00.03 smbd               
 2400 root      20   0 13016 1072  424 S    0  0.1   0:00.01 smbd               
 2401 root      20   0 10600 1436  896 S    0  0.1   0:00.01 winbindd           
 2406 root      20   0 10600 1188  648 S    0  0.1   0:00.00 winbindd           
 2450 daemon    20   0  2096  452  324 S    0  0.0   0:00.00 atd               
 2475 root      20   0  3480 1036  824 S    0  0.1   0:00.02 cron               
 2494 root      20   0 29900 6408 3484 S    0  0.3   0:00.04 apache2           
 2513 root      20   0  8432 3420 2604 S    0  0.2   0:00.15 login             
 2515 www-data  20   0 29900 3508  576 S    0  0.2   0:00.01 apache2           
 2516 www-data  20   0 29900 3508  576 S    0  0.2   0:00.00 apache2           
 2517 www-data  20   0 29900 3508  576 S    0  0.2   0:00.00 apache2           
 2518 www-data  20   0 29900 3508  576 S    0  0.2   0:00.01 apache2           
 2519 www-data  20   0 29900 3508  576 S    0  0.2   0:00.00 apache2           
 2549 root      18  -2  2276  596  468 S    0  0.0   0:00.00 dhclient3         
 2592 root      18  -2  5436 1044  652 S    0  0.1   0:00.00 sshd               
 2626 ckalapat  20   0  8428  868   68 S    0  0.0   0:00.00 login             
 2645 root      20   0 17320 2408 1632 S    0  0.1   0:00.03 console-kit-dae   
 2719 ckalapat  20   0  5728 3008 1448 S    0  0.1   0:00.28 bash               


Last edited by cakalapati on Wed Feb 23, 2011 4:27 pm, edited 3 times in total.

Top
 Profile  
Thanks  

Attention Guest: Remove this ad by Registering with the MediaSmartServer.net Forums. It's Free!
PostPosted: Fri Jul 10, 2009 1:32 am 
Offline
2.5TB storage
2.5TB storage

Joined: Thu Apr 03, 2008 3:52 pm
Posts: 217
Thanks: 12
Thanked: 61 times in 32 posts
lsusb
Code:
Bus 001 Device 004: ID 090c:1000 Feiya Technology Corp. Memory Bar
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 002 Device 002: ID 413c:3016 Dell Computer Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


lsmod
Code:
Module                  Size  Used by
cbc                    11648  9
aes_i586               15744  10
aes_generic            35880  1 aes_i586
ecb                    10752  1
video                  25360  0
output                 11008  1 video
input_polldev          11784  0
lp                     17156  0
parport                42220  1 lp
iTCO_wdt               19236  0
iTCO_vendor_support    11652  1 iTCO_wdt
led_class              12036  0
psmouse                61972  0
pcspkr                 10496  0
serio_raw              13316  0
intel_agp              34500  1
hid_dell               10112  0
agpgart                42696  1 intel_agp
usbhid                 42464  1 hid_dell
usb_storage            82752  0
sky2                   55428  0
fbcon                  45856  0
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13696  1 fbcon
softcursor              9984  1 bitblit


Top
 Profile  
Thanks  
PostPosted: Wed Jul 15, 2009 1:33 pm 
Offline
Newbie
Newbie

Joined: Wed Jul 15, 2009 8:37 am
Posts: 2
Thanks: 0
Thanked: 0 time in 0 post
Hi,

Can you please tell me what kind of VGA adapter is installed on the mobo? I'm going to try and install Windows 7 on the box (just because I can ;-)

Thanks!
Michael


Top
 Profile  
Thanks  
PostPosted: Thu Jul 16, 2009 1:26 am 
Offline
2.5TB storage
2.5TB storage

Joined: Thu Apr 03, 2008 3:52 pm
Posts: 217
Thanks: 12
Thanked: 61 times in 32 posts
I don't have the box handy at the moment, however, you could probably log into the box (via RDP) and see the video driver. This, of course, assumes that you have not already blown away your Windows Home Server image.

By the way, as a side note: if you are going to install any OS onto your MediaSmart server or your Acer easyStore computer, do it with another hard drive. That is, do not blow away your working Windows Home Server image. Just pull it out and stick in a fresh drive that allows you to tinker to your hearts content.


Top
 Profile  
Thanks  
PostPosted: Thu Jul 16, 2009 9:47 am 
Offline
1TB storage
1TB storage

Joined: Sat Jul 11, 2009 8:58 am
Posts: 30
Thanks: 0
Thanked: 1 time in 1 post
Curious here... i am a fan of linux... but why would you install linux on one of these home server boxes?


Top
 Profile  
Thanks  
PostPosted: Thu Jul 16, 2009 9:50 am 
Offline
Newbie
Newbie

Joined: Wed Jul 15, 2009 8:37 am
Posts: 2
Thanks: 0
Thanked: 0 time in 0 post
Because we can.... we'll not me, but other people. I for myself will try Win7, because I want to use the "homegroup" features of that system. I'm sure that people who want Linux on the box have some sort of requirement that they like.


Top
 Profile  
Thanks  
PostPosted: Sat Aug 08, 2009 10:22 pm 
Offline
2.0TB storage
2.0TB storage

Joined: Sat Feb 28, 2009 10:30 pm
Posts: 127
Thanks: 2
Thanked: 9 times in 8 posts
I want to get linux unning because its much more secure the windos will ever be. My box is a web box, and media streaming box.

_________________
EX485, 4gb ram
Intel® Pentium® Processor E5200 (2M Cache, 2.50 GHz, 800 MHz FSB)
4 1Tb drives
WHS 2011 64bit


Top
 Profile  
Thanks  
PostPosted: Sun Aug 09, 2009 4:52 pm 
Offline
2.0TB storage
2.0TB storage

Joined: Sat Feb 28, 2009 10:30 pm
Posts: 127
Thanks: 2
Thanked: 9 times in 8 posts
Well Centos netinstall is a NO Go, damn thing doesnt recognize the keyboard, Ubuntu server 9.04 on the other hand is installing now.

_________________
EX485, 4gb ram
Intel® Pentium® Processor E5200 (2M Cache, 2.50 GHz, 800 MHz FSB)
4 1Tb drives
WHS 2011 64bit


Top
 Profile  
Thanks  
PostPosted: Sun Jan 23, 2011 1:38 am 
Offline
Newbie
Newbie

Joined: Sun Jan 23, 2011 12:44 am
Posts: 1
Thanks: 0
Thanked: 0 time in 0 post
Ubuntu Server 10.10 works on Acer EasyStore H340 as well.

4 purple HD bay lights do not work, but the HD + network activity lights are meaningful.

Cannot get the thing to beep for me though.

Image

I could not get Superb Mini Server to install for some reason, so Ubuntu was my next choice for ease of use.. plus I KNEW it would install :)

Installed by putting the HD in a Mac Pro. After installation I modified /etc/udev/rules.d/70-persistent-net.rules to match the EasyStore's network configuration; put the HD back into the EasyStore, and voila.

I highly recommend the set-up. Very useful and affordable home/development server.


Top
 Profile  
Thanks  
PostPosted: Fri Jan 13, 2012 7:37 am 
Offline
Newbie
Newbie

Joined: Fri Jan 13, 2012 7:28 am
Posts: 1
Thanks: 0
Thanked: 1 time in 1 post
I I got a Ubuntu Server 11.04 on my h340 and the HDD-Led's were always bugging me.. so I wrote a ltl tool which runs in the background and let the led light blue if there is a disk in that slot... just compile it Should run fine.. feel free to change etc
http://skeleten.dyndns.org/upload/uploa ... Driver.zip

rewrote it, more cleaner version can be found here
http://skeleten.dyndns.org/upload/uploa ... util_2.zip


just type "make" and start it with "./ledUtil", it will run in background and update led's every two seconds. busy drives will get a red led.
need to be runned as root. It's no virus, if you don't trust me, I share the source code so you can just take a look at it.

Edit:
aww screw providing packages
download the source here:
https://bitbucket.org/skeleten/acer-h340-linux-led-util
direct download:
https://bitbucket.org/skeleten/acer-h34 ... master.zip


Top
 Profile  
Thanks  
The following user would like to thank skeleten for this post
yakuza
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group