Ruben Rocha wrote:
When you installed the debug board cable on the motherboard port did you add a jumper to the jp1 pin?
No sir. Somehow I missed the memo on that part. So, now I'm off to do that. Life has gotten in the way of this project, so I apologize for the delay in responding to your question. - Gary
Opened up the unit. There IS a jumper on the J pin and one on the jp1 pin as well. The jp1 has 3 posts, with the jumper covering the 2 pins closest (above?) the jp1 lettering on the board. It was this way upon opening the unit. I'll reassemble and attempt power-up with display attached to breakout board. BTW, I'm using a PS2 style keyboard as well. If I'm to switch to a USB keyboard, will connecting it to the front USB port be sufficient? Again thanks for the input! -
Also have 4 GIG RAM, and the S5200 CPU.
I've put it all back together. Carefully routed the cabling. Powered up, and still no signal reaches the display. Again, verified VGA cable and display are GOOD via attaching to another device. Any ideas? Anyone? Thanks again! - Gary