MediaSmartServer.net
http://www.mediasmartserver.net/forums/

10Muse iPad App For Dune and PCH Media Players
http://www.mediasmartserver.net/forums/viewtopic.php?f=13&t=11964
Page 79 of 85

Author:  KillroyWasHere [ Sat Oct 20, 2018 8:14 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

IngeMeissel wrote:
Unfortunately after updating my iPad pro to 3.24, the app will not launch anymore.
I uninstalled, rescanned movies and shows with library manager 3.22.2 and re-exported to dropbox.
Reinstalled the IOS-App and imported from dropbox - after finishing import the IOS-App shuts down and cannot be launched anymore.



Same here. Totally dead even after a complete re-install and updated library. If I install without updating the library it will launch and run but not after updated import.

Author:  Pafsanias [ Sat Oct 20, 2018 12:29 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

KillroyWasHere wrote:
IngeMeissel wrote:
Unfortunately after updating my iPad pro to 3.24, the app will not launch anymore.
I uninstalled, rescanned movies and shows with library manager 3.22.2 and re-exported to dropbox.
Reinstalled the IOS-App and imported from dropbox - after finishing import the IOS-App shuts down and cannot be launched anymore.



Same here. Totally dead even after a complete re-install and updated library. If I install without updating the library it will launch and run but not after updated import.


I'm looking into it, I'll try to fix it as soon as possible.

Author:  Pafsanias [ Sat Oct 20, 2018 2:28 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

KillroyWasHere wrote:
IngeMeissel wrote:
Unfortunately after updating my iPad pro to 3.24, the app will not launch anymore.
I uninstalled, rescanned movies and shows with library manager 3.22.2 and re-exported to dropbox.
Reinstalled the IOS-App and imported from dropbox - after finishing import the IOS-App shuts down and cannot be launched anymore.



Same here. Totally dead even after a complete re-install and updated library. If I install without updating the library it will launch and run but not after updated import.


Library Manager 3.24.1 is available for download here.

To fix the problem with the latest version of the app, re-export zones.

You don't have to delete-reinstall the iPad app when such a problem appears. From the iPad Settings / 10Muse / 'Reset options and delete databases at next start'.

Author:  IngeMeissel [ Sat Oct 20, 2018 2:51 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Thx for helping out that fast - works fine!

Author:  KillroyWasHere [ Fri Nov 02, 2018 5:04 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Forgot to mention that the updated versions work great. Thanks.

BTW...am I going crazy but is there no way to edit TV shows? I can't change any data (actors, episode names, etc, etc). I remember that you could..or I thought you could.

I am adding some new (custom episodes) and I can't add any data to them.

Author:  Pafsanias [ Wed Nov 14, 2018 2:35 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Library Manager 3.24.2 is available for download here with minor fixes.

KillroyWasHere wrote:
Forgot to mention that the updated versions work great. Thanks.

BTW...am I going crazy but is there no way to edit TV shows? I can't change any data (actors, episode names, etc, etc). I remember that you could..or I thought you could.

I am adding some new (custom episodes) and I can't add any data to them.


Not directly. That would create synchronization issues with the TVDB Update function, which I'm trying to avoid.

In order to be able customize the show, without creating a new empty one, you can clone an existing show (Right Click / Advanced / Clone). The new, identical show will not have a 'TVDB ID' and you can edit it to your liking.

Of course cloned shows cannot be updated from TVDB, so this functionality is only useful for 'Finished' shows.

When creating the clone, you will be asked for a new folder name. Don't forget to rename the corresponding folder accordingly.

Author:  KillroyWasHere [ Tue Dec 25, 2018 10:50 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Pafsanias wrote:
The 10Muse iPad app supports the url scheme ‘scheme10muse:\\’. Create a button on your home automation app that sends that url and it will switch to the 10Muse app.

For the other way round (switching to another app from the 10Muse UI), put the ‘Control.xml’ file (download) inside the ‘\Dropbox\Apps\10Muse Data\Settings\’ folder and update from the iPad app. A new button will appear (next to the zones selection) that will switch using the defined url. The posted example is for Crestron, you can edit it to your liking.


Two questions... does anyone else have a copy of the control.xml file that Pafsanias posted? The link no longer works and somehow I failed to save it to my archives.

Also, does the URL scheme on the control.xml still work? I don't see any of those options on my LM but that maybe cause I do not have the xml in the directory.

Thanks.

Author:  KillroyWasHere [ Sat Jan 05, 2019 8:27 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Has anyone noticed that Ratings & Reviews are not working for the past few weeks? Actually the last Rating & Review that was added/updated was on 12/15/2018.

Author:  Pafsanias [ Tue Jan 08, 2019 5:08 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

All reported issues have been fixed for the next release (probably next week).

Author:  KillroyWasHere [ Wed Jan 09, 2019 10:14 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Pafsanias wrote:
All reported issues have been fixed for the next release (probably next week).


Again, thank you so much for the continuing support.

People always ask me why I don’t use Emby or Plex and I always tell them “Have you ever tried to navigate an 8,000+ library using a 10-foot interface?” It would take forever to browse.

Author:  Pafsanias [ Wed Jan 23, 2019 1:56 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

10Muse iPad version 3.26 is now available on the App Store with various fixes and enhancements.

Experimental: A new reviews display mode is available on the skin 'Brooklyn', with reviews appearing on the fanart page. In case of positive feedback I will extend it to the rest of the skins.

10Muse Library Manager 3.26.1 is available for download here. Reviews and ratings now work again, use 'Update Reviews and Ratings' to update your latest movies.

KillroyWasHere wrote:
Two questions... does anyone else have a copy of the control.xml file that Pafsanias posted? The link no longer works and somehow I failed to save it to my archives.

Also, does the URL scheme on the control.xml still work? I don't see any of those options on my LM but that maybe cause I do not have the xml in the directory.

Thanks.

Unpack and copy the Scripts.xml file (from here) into the Dropbox Settings folder. Change only the 'IntegrationButton' node. Example:

<IntegrationButton>
<Command>Crestron://</Command>
<Label>Crestron</Label>
</IntegrationButton>

Note that each zone has a different node.

Author:  KillroyWasHere [ Wed Jan 23, 2019 2:52 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Pafsanias wrote:
10Muse iPad version 3.26 is now available on the App Store with various fixes and enhancements.

Experimental: A new reviews display mode is available on the skin 'Brooklyn', with reviews appearing on the fanart page. In case of positive feedback I will extend it to the rest of the skins.

10Muse Library Manager 3.26.1 is available for download here. Reviews and ratings now work again, use 'Update Reviews and Ratings' to update your latest movies.

KillroyWasHere wrote:
Two questions... does anyone else have a copy of the control.xml file that Pafsanias posted? The link no longer works and somehow I failed to save it to my archives.

Also, does the URL scheme on the control.xml still work? I don't see any of those options on my LM but that maybe cause I do not have the xml in the directory.

Thanks.

Unpack and copy the Scripts.xml file (from here) into the Dropbox Settings folder. Change only the 'IntegrationButton' node. Example:

<IntegrationButton>
<Command>Crestron://</Command>
<Label>Crestron</Label>
</IntegrationButton>

Note that each zone has a different node.


Once again, thank you so much!

Everything seems to work perfectly. All my reviews are coming down fine again.

I'll have to play with the Scripts settings later.

The reviews on the fanart page on Brooklyn is pretty cool. They change a bit slow but looks great. Great addition.

BTW, I forgot to mention this long time ago but I never noticed that in the remote control pane that you can change audio/subs. I've been going to the Kodi app to do that all this time and it was there all along on 10Muse. That is an awesome feature that I never noticed. Thanks.

Author:  KillroyWasHere [ Mon Feb 18, 2019 5:59 pm ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

I have been using MrMc/SPMC/Kodi for so long that when I went back to using MPC-HC I think I have found a bug with the remote control panel.

Here is what it looks like for Kodi forks:
Image

The Seek Bar and the +/-20" or +/-2' buttons work perfectly with the Kodi fork remote:
Image

But here is what it looks like with MPC-HC remote:
Image

But the seek bar nor the +/-20" or +/-2' buttons seem to work.

And to test something else, I tested MPC-BE and nothing seems to work (although I don't know if you supported it to begin with):
Image

Author:  Pafsanias [ Wed Feb 20, 2019 6:09 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

KillroyWasHere wrote:
I have been using MrMc/SPMC/Kodi for so long that when I went back to using MPC-HC I think I have found a bug with the remote control panel.
...

ok, I'll fix as soon as I can.

Author:  KillroyWasHere [ Wed Feb 20, 2019 9:51 am ]
Post subject:  Re: 10Muse iPad App For Dune and PCH Media Players

Pafsanias wrote:
KillroyWasHere wrote:
I have been using MrMc/SPMC/Kodi for so long that when I went back to using MPC-HC I think I have found a bug with the remote control panel.
...

ok, I'll fix as soon as I can.


Once again, thank you!

Page 79 of 85 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/