I'm pleased to announce that MSS Fan Control 1.0.0.9 has been released with support for both HP 1.3 and 3.0 software on the EX47x servers.
I've updated the first post in this topic with the full details, or see the blog post.
| MediaSmartServer.net http://www.mediasmartserver.net/forums/ |
|
| MSS Fan Control Add-In http://www.mediasmartserver.net/forums/viewtopic.php?f=10&t=1653 |
Page 10 of 12 |
| Author: | CBick [ Fri Mar 19, 2010 9:07 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
yakuza wrote: Looks like the US customers got shipping notices today, so I'll try to get this sorted over the weekend. Thank Post <click> |
|
| Author: | cavediver [ Fri Mar 19, 2010 9:18 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
yakuza wrote: Sorry, should have said that some US customers were getting shipping notices, probably the first few that ordered. I finally got a shipment notice at 6:30 p.m. |
|
| Author: | Comp1962 [ Sat Mar 20, 2010 8:55 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
Yakusa I think I am going to put a fan in front of my EX470 when my 3.0 arrives hoping it will help until you are able to release the MSS Fan Control Add-in that will work with 3.0 and pre 3.0 systems. All I know is HP sent me and email stating my discs were shipped 3/19 so I expect them by 3/26 and would like to install the 3.0 the following weekend. |
|
| Author: | yakuza [ Mon Mar 22, 2010 10:46 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
I'm pleased to announce that MSS Fan Control 1.0.0.9 has been released with support for both HP 1.3 and 3.0 software on the EX47x servers. I've updated the first post in this topic with the full details, or see the blog post.
|
|
| Author: | JohnBick [ Mon Mar 22, 2010 10:56 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
And a number of us have successfully tested this. Worked fine for me. I do NOT have v3.0 installed, btw. |
|
| Author: | jumran [ Mon Mar 22, 2010 11:16 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
Thanks for the updated add-in. Installed it on my EX475 3.0 server and seems to be working great so far. |
|
| Author: | Comp1962 [ Mon Mar 22, 2010 3:46 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
Works fine for both my EX470. Got the 3.0 today and will install it but I caught some messages about the discs being labeled wrong so I have to take a look at that. |
|
| Author: | yakuza [ Mon Mar 22, 2010 3:49 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
HP has indicated that they are aware of the problem, have reported it to the duplication company, and will be fixing the problem for additional production runs. |
|
| Author: | wakkas [ Mon Mar 22, 2010 4:16 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
Great!!.. needed this to keep my LE-1640 in control  now waiting for 3.0 to take the plungthanks Alex |
|
| Author: | Ehrp [ Thu Apr 01, 2010 9:11 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
I'm a big fan of being green and saving some $$ at the same time. This sounds like another great addin to my Ex470 collection. Many thanks to Alex and the entire WHS community for their relentless efforts and innovated ways to make this product fun to own! Since I'm such a NOOB, would someone care to advise on what would be the ideal #s to target for? My Current reading are as follow: Fans and Temperatures: Upper Fan ~1454rpm, Lower Fan ~1442rpm, CPU ~31-32c Voltages: VCCP ~0.992v, 5V ~4.945v, 12V ~12.032v, 1.8V ~1.84v, AUX ~5.08, 3.3V ~3.328v Are those #s acceptable or taking the Optimized defaults setting from MSS Fan is a better option? |
|
| Author: | yakuza [ Thu Apr 01, 2010 9:42 pm ] |
| Post subject: | Re: MSS Fan Control Add-In |
Thanks for the feedback!  Your CPU temp is fine, I'd probably not change anything, unless you'd like to slow down the fans a little to see if it reduces the noise of the server. You could try turning the Fan Speed Adjustment down to -100 or -200, see how that sounds and if your CPU temp changes. The reality is this won't make your server any greener or save energy, it's more designed to speed up the fans for extra cooling when people run the server in a warm location or upgrade the processor.
|
|
| Author: | Ehrp [ Fri Apr 02, 2010 10:06 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
Thanks for the suggestion! If the fan operates at a slower rpm and maintaining the same level of coolness to the cpu, wouldn't that use less energy and in turn saving me $$$? just a wishful thought
|
|
| Author: | yakuza [ Fri Apr 02, 2010 10:08 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
Sure, and it might add up to a penny or two a month. Those fans use little power and you'd only be reducing the power consumption a tiny amount, I doubt it would be detectable on a power consumption measuring device.
|
|
| Author: | bgoodbody [ Sat Aug 07, 2010 8:30 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
I started getting these errors afer istalling MSS FAn Control and using Optimum settings System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:9666 Server stack trace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket(EndPoint ipEndPoint) at System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket() at System.Runtime.Remoting.Channels.RemoteConnection.GetSocket() at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machinePortAndSid, Boolean openNew) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at HPMediaSmartServer.IMediaCollectorProxy.GetMediaCollectionStatus() at HPMediaSmartServer.MediaCollector.GetMediaCollectionStatus() at MediaCollectorAddIn.MediaCollectorStatus.Setup() For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ----------------------------------------------------------------------------------------------------- Could not list video converter jobs: Object reference not set to an instance of an object. Exception:System.NullReferenceException Message:Object reference not set to an instance of an object. Source:TranscoderConsoleAddIn StackTrace: at TranscoderConsoleAddIn.TranscoderStatusControl.QueryJobList(Object sender, EventArgs e) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ---------------------------------------------------------------------------------------------------- |
|
| Author: | yakuza [ Sat Aug 07, 2010 9:34 am ] |
| Post subject: | Re: MSS Fan Control Add-In |
Those are not related to MSS Fan Control, they are exceptions that are sometimes seen in the 3.0 software. A server reboot normally resolves them. |
|
| Page 10 of 12 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|